(45) - INTERNATIONAL HARVESTER VIBRA SHANK CULTIVATOR (1/64-12/81)

Запчасти Case IH 45

(2) - INTRODUCTION
(3) - INTRODUCTION
(A-1) - INTERNATIONAL 45 VIBRA SHANK CULTIVATOR GROUND WORKING TOOLS
(A-2) - GROUND WORKING TOOLS & SHANKS W/SERRATED TYPE SHANK BUSHING, BUILT 1965-1970 SEASON
(A-3) - GROUND WORKING TOOLS AND SHANKS, VIBRA SHANK, W/NOTCHED TYPE SHANK BUSHING BUILT 1970 SEASON&SINCE
(A-4) - GROUND WORKING TOOLS AND SHANKS, GROUND WORKING TOOLS
(B-02) - SLOW MOVING VEHICLE EMBLEM, PRODUCT GRAPHICS
(B-03) - MAIN FRAME, 8 FOOT 6 INCH
(B-04) - MAIN FRAME, 12 FOOT 6 INCH
(B-05A[A]) - ALTERNATE SHANK MOUNTING TUBE FOR 6 INCH SPACING
(B-05A) - EXTENSIONS
(B-05B[A]) - TRAILING HITCH
(B-05B) - C-FRAME EXTENSIONS
(B-06[A]) - TRUSS ROD, FOR THREE POINT HITCH 12 FOOT 6 INCH MACHINE EQUIPPED W/MULCHER
(B-06[B]) - TRUSS ROD
(B-06) - C-FRAME EXTENION HINGE, REQUIRED FOR FOLDING C FRAME WHILE MACHINE IS IN TRANSPORT
(B-07) - C-FRAME LIFT HELPER SPRING, 12 FOOT 6 INCH MODEL ONLY, USED WITH C FRAME HINGE
(B-08[A]) - VERTICAL LIMITER FOR SAFETY W/2 POINT FAST HITCH W/IH F656 TRACTOR, BUILT PRIOR TO JULY, 1972 SEASON
(B-08) - VERTICAL LIMITER,FOR SAFETY W/2 PT FAST HITCH W/IH F706,F756,F806 PR F856 TRAC BUILT PRIOR TO 7/1972
(B-09) - THREE POINT HITCH
(B-11) - PNEUMATIC GAUGE WHEEL MOUNTING, OFFSET MOUNTED AXLE TYPE
(B-12) - PNEUMATIC GAUGE WHEEL MOUNTING, CENTER MOUNTED AXLE TYPE
(B-13) - PNEUMATIC GAUGE WHEEL AND HUB
(B-14) - STEEL GAUGE WHEEL, PRIOR TO 1973 SEASON
(B-15) - FAST HITCH, FOR 12 FOOT 6 INCH MODEL ONLY, BUILT PRIOR TO MAY 1974 SEASON
(B-16) - C-FRAME HYDRAULIC LIFT, 16 FOOT 6 INCH AND LARGER MODEL WITH 6 INCH SPACING
(B-17) - C-FRAME HYDRAULIC LIFT, RECOMMENDED HYDRAULICS
(B-18) - C-FRAME HYDRAULIC LIFT, RECOMMENDED HYDRAULICS
(B-19) - C-FRAME LIFT HYDRAULIC CYLINDER
(B-20) - C-FRAME LIFT HYDRAULIC CYLINDER, MONARCH
(B-21) - C-FRAME LIFT HYDRAULIC CYLINDER, MONARCH
(B-22) - C-FRAME LIFT HYDRAULIC CYLINDER
(C-02) - MAIN FRAME AND HITCH, 8 FOOT 6 INCH MODEL
(C-03) - MAIN FRAME AND HITCH, 12 FOOT 6 INCH MODEL
(C-04) - AXLE AND CONNECTIONS, PRIOR TO SERIAL NO. 5526
(C-05) - AXLE AND CONNECTIONS, SERIAL NO 5526 AND SINCE
(C-06) - WHEEL AND HUB
(C-07) - ROCKSHAFT UNIT
(C-08) - SLOW MOVING VEHICLE EMBLEM
(C-08A) - PRODUCT GRAPHICS
(C-09[A]) - C-FRAME EXTENSION
(C-09[B]) - TRAILING HITCH
(C-09) - EXTENSIONS
(C-10) - HAND LIFT, BUILT PRIOR TO JULY 1978
(C-11) - C-FRAME LIFT HELPER SPRING, PRIOR TO SERIAL NO 5526
(C-12) - C-FRAME LIFT HELPER SPRING, SERIAL NO 5526 AND SINCE
(C-13[A]) - DUPLEXING TIE LINK REQUIRED TO DUPLEX 8 FOOT 6 INCH MODEL W/101 SQUADRON HITCH
(C-13[B]) - C-FRAME EXTENSION HINGE REQUIRED FOR FOLDING C FRAME WHILE MACHINE IS IN TRANSPORT
(C-13) - DUPLEXING BAR REQUIRED TO DUPLEX 86" MODEL W/101 SQUADRON HITCH USE ON MACHINES PRIOR TO OCT. 1971
(C-14) - HYDRAULIC MOUNTING PARTS
(C-15) - C-FRAME HYDRAULIC LIFT, 16 FOOT 6 INCH AND LARGER MODEL, W/6 INCH SPACING
(C-16) - C-FRAME HYDRAULIC LIFT, RECOMMENDED HYDRAULICS
(C-17) - C-FRAME HYDRAULIC LIFT, RECOMMENDED HYDRAULICS
(C-18) - C-FRAME LIFT HYDRAULIC CYLINDER
(C-19) - C-FRAME LIFT HYDRAULIC CYLINDER, MONARCH
(C-20) - C-FRAME LIFT HYDRAULIC CYLINDER, MONARCH
(C-21) - C-FRAME LIFT HYDRAULIC CYLINDER
(C-22) - REMOTE CONTROL HYD CYL RECOMMENDED HYD FOR TRAC W/HYD SYSTEMS RATED UP TO 3000 PSI
(C-23) - REMOTE CONTROL HYDRAULIC CYLINDER
(C-24[A]) - SAFETY CHAIN EQUIPMENT
(C-24) - REMOTE CONTROL HYD CYL RECOMMENDED HYD FOR TRACS W/HYD SYSTEMS RATED UP TO 2500 PSI
(D-02) - MAIN FRAME, BUILT PRIOR TO AUGUST 1976 SEASON
(D-03) - MAIN FRAME, BUILT AUGUST 1976 SEASON AND SINCE
(D-04[A]) - MAIN FRAME AXLE BUILT PRIOR TO AUGUST, 1976 SEASON
(D-04) - TRACTOR HITCH JACK, 22 FOOT 6 INCH MODEL BUILT PRIOR TO, THE 1972 SEASON
(D-05) - MAIN FRAME AXLE, BUILT AUGUST 1976 SEASON AND SINCE
(D-06) - WHEEL AND HUB-MAIN FRAME
(D-07) - PRODUCT GRAPHICS
(D-08[A]) - WING FRAME AXLE BUILT AUGUST, 1976 SEASON AND SINCE
(D-08) - WING FRAME AXLE, BUILT PRIOR TO AUGUST, 1976 SEASON
(D-09[A]) - HITCH BUMPER 22-1/2 FOOT MODEL, PRIOR TO 1978 SEASON 31-1/2 FOOT, BUILT 1969 TO 1974 SEASON
(D-09) - WHEEL AND HUB, WING FRAME
(D-10[A]) - EXTENSIONS
(D-10) - GAUGE WHEEL, 31-1/2 FT.
(D-11) - WHEEL AND HUB, GAUGE WHEEL
(D-12) - HITCH AND HYDRAULIC MOUNTINGS, 22 FOOT 6 INCH PRIOR TO AUGUST 1976
(D-13) - HITCH AND HYDRAULIC MOUNTINGS, 31 FOOT 6 INCH PRIOR TO SEPTEMBER 1974
(D-14) - HITCH AND HYDRAULIC MOUNTINGS, 31 FOOT 6 INCH MODEL BUILT SEPTEMBER 1974 TO AUGUST 1976 SEASON
(D-15[A]) - TRACTOR HITCH JACK, 31 FOOT 6 INCH MODEL BUILT 1974 SEASON TO AUGUST, 1976 SEASON
(D-15) - TRACTOR HITCH JACK 226" MODEL BUILT 1972 SEASON TO AUGUST 1762, 31"6" MODEL BUILT 1969-1974 SEASON
(D-16) - TRACTOR HITCH, BUILT AUGUST, 1976 SEASON & SINCE
(D-17[A]) - SAFETY CHAIN EQUIPMENT
(D-17) - TRACTOR HITCH JACK, BUILT AUGUST, 1976 SEASON & SINCE
(D-18) - HAND WINCH ASSEMBLY, 22 FOOT 6 INCH MODEL ONLY BUILT PRIOR TO MAY 1973 SEASON
(D-19) - HAND WINCH WING LIFT, NOT FOR USE W/MULCHERS, 22 6" MODEL BUILT 1969 SEASON TO MAY 1974 SEASON
(D-20) - WING FRAME AND LIFT PARTS, BUILT PRIOR TO AUGUST 1976 SEASON
(D-21) - HAND WINCH ASSEMBLY, 22 FOOT 6 INCH MODEL ONLY BUILT MAY 1973 SEASON TO MAY, 1974 SEASON
(D-22) - WING FRAME, 22 FOOT 6 INCH MODEL, BUILT AUGUST 1976 SEASON & SINCE
(D-23) - WING FRAME, 31 FOOT 6 INCH MODEL BUILT AUGUST, 1976 SEASON & SINCE
(D-24) - WING LIFT UNIT, 22 FOOT 6 INCH MODEL BUILT AUGUST, 1976 SEASON AND SINCE
(D-26) - WING LIFT UNIT, 31 FOOT 6 INCH MODEL BUILT AUGUST, 1976 SEASON AND SINCE
(D-27) - C-FRAME EXTENSIONS
(D-28) - MAIN AND WING FRAME ROCKSHAFTS, BUILT PRIOR TO AUGUST, 1976 SEASON
(D-30) - MAIN FRAME DEPTH CONTROL & ROCKSHAFT, BUILT AUGUST, 1976 SEASON AND SINCE
(D-31) - HAND LIFT, BUILT PRIOR TO JULY 1978
(D-32[A]) - HYDRAULIC DIVERTER VALVE PUSH-PULL TYPE VALVE FOR USE ON 22 FOOT 6 INCH MODEL
(D-32) - WING FRAME TRUSS ROD, 31 FOOT 6 INCH MODEL BUILT PRIOR TO AUGUST 1976 SEASON
(D-33) - WING LIFT HYDRAULICS
(D-34) - HYDRAULIC DIVERTER VALVE, LEVER TYPE VALVE ON 22 FOOT 6 INCH MODEL
(D-35) - WING LIFT HYDRAULICS, W/PUSH PULL DIVERTER VALVE, W/DUAL HYD CNTRL., 1965 TO 68 SEASON
(D-36) - WING LIFT HYDRAULICS, W/LEVER TYPE DIVERTER VALVE, W/SINGLE HYD CONTROL, 1968 TO 69 SEASON
(D-38) - WING LIFT HYDRAULICS, W/LEVER TYPE DIVERTER VALVE, W/DUAL HYD CONTROL, 1968 TO 69 SEASON
(D-39) - MAIN ROCKET CENTER EQUILIZER, W/DUAL CENTER FRAME ROCKSHAFT, W/ SINGLE VALVE HYD, 226" MODEL
(D-40) - WING LIFT HYDRAULICS, W/SINGLE MAIN ROCKSHAFT, W/SINGLE HYDRAULIC CONTROL 1969 SEASON TO 1974 SEASON
(D-41) - TRAILING HITCH
(D-42) - WING LIFT HYDRAULICS, W/SINGLE MAIN ROCKSHAFT, W/DUAL HYDRAULIC CONTROLS, 1969 SEASON TO 1974 SEASON
(D-44) - WING LIFT HYD,W/SINGLE MAIN ROCKSHAFT,W/SINGLE HYD CTRL UNIT,226" MODEL BUILT 1974 -AUG 1976 SEASON
(D-45) - WING LIFT HYD, W/SINGLE MAIN ROCKSHAFT, W/DUAL HYD CTRL, 226" MODEL BUILT 1974 TO AUG 1976 SEASON
(D-46) - WING LIFT HYD,W/SINGLE MAIN ROCKSHAFT,W/DUAL HYD CTRL,316" MODEL BUILT 1974 SEASON - AUG1976 SEASON
(D-47) - HYD CONNECTIONS,W/HYD WING LIFT,W/SINGLE CTRL HYD,226 MODEL BUILT PRIOR TO THE 1969 SEASON
(D-48) - HYD CONNECTIONS,W/HYD WING LIFT,W/DUAL CTRL HYD,226" MODEL BUILT PRIOR TO THE 1969 SEASON
(D-49) - HYDRAULIC CONNECTIONS, W/HYDRAULIC WING LIFT, W/SINGLE CONTROL HYD, BUILT 1969 SEASON TO 1974 SEASON
(D-50) - REMOTE CTRL HYD CYL, RECOMMENDED HYDS FOR TRAC W/ HYD SYSTEM RATED UP TO 3000 PSI
(D-51) - REMOTE CTRL HYD CYL, PRIOR TO AUG 1976 SEASN, RECOMM HYD FOR TRACTORS W/HYD SYST RATD UP T0 2500 PSI
(D-52) - REMOTE CTRL HYD CYL, RECOMMENDED HYD FOR TRAC W/ HYD SYSTEMS RATED UP TO 2500 PSI
(D-53) - REMOTE CTRL HYD CYL,,RECOMMENDED HYDS FOR TRAC W/ HYD SYS. RATED UP TO 2500 PSI
(D-54) - WING FRAME DEPTH CONTROL, BUILT AUGUST, 1976 SEASON & SINCE
(D-55) - WING LIFT HYDRAULIC SYSTEM, 22 FOOT 6 INCH MODEL BUILT AUGUST 1976 SEASON AND SINCE
(D-56) - WING LIFT HYDRAULIC SYSTEM, 31 FOOT 6 INCH MODEL BUILT AUGUST, 1976 SEASON AND SINCE
(D-57) - DEPTH CONTROL HYDRAULICS, CESSNA, OPT WITH CROSS HYD CYL TYPE, MODELS BUILT AUGUST 1976 SEASON&SINCE
(D-59) - DEPTH CONTROL HYDRAULICS, CROSS, OPT WITH CESSNA HYD CYL TYPE, BUILT AUGUST 1976 SEASON AND SINCE
(D-61) - ALTERNATE CHECK VALVE ASSY, USE W/DEPTH CONTROL FOR TRACTORS W/O CHECK VALVE
(D-62) - SLAVE HYDRAULIC CYLINDER, CROSS, AUGUST, 1976 SEASON AND SINCE
(D-63) - SLAVE HYDRAULIC CYLINDER, CESSNA, AUGUST, 1976 SEASON AND SINCE
(D-64) - MASTER HYDRAULIC CYLINDER, CROSS, AUGUST, 1976 SEASON AND SINCE
(D-66) - MASTER HYDRAULIC CYLINDER, CESSNA, AUGUST 1976 SEASON AND SINCE
(D-68) - WING LIFT HYDRAULIC CYLINDER, MODELS BUILT 1965 TO 1974 SEASON
(D-69) - WING LIFT HYDRAULIC CYLINDER, MODELS BUILT 1974 TO AUGUST 1976
(D-70) - WING LIFT HYDRAULIC CYLINDER - ALCO, 22 FOOT 6 INCH MODEL BUILT AUG 1976 SEASON AND SINCE
(D-71) - WING LIFT HYDRAULIC CYLINDER, PRINCE, 22 FOOT 6 INCH MODEL BUILT AUGUST 1976 SEASON & SINCE
(D-72) - WING LIFT HYDRAULIC CYLINDER, PNEU, HYD, 22 FOOT 6 INCH MODEL BUILT AUGUST 1976 SEASON AND SINCE
(D-73) - WING LIFT HYDRAULIC CYLINDER, CROSS, 31 FOOT 6 INCH MODEL BUILT AUG 1976 SEASON AND SINCE
(D-74) - WING LIFT HYDRAULIC CYLINDER, PRINCE, 31 FOOT 6 INCH MODEL BUILT AUG 1976 SEASON AND SINCE
(E-02[A]) - MULCHER EXTENSION, 1 FOOT 3 INCH 3 BAR, NOT WITH WING MODELS
(E-02) - MULCHER ATTACHMENT CARRIAGE ARM
(E-03) - 2 FOOT 3 INCH MULCHER, HINGED WING PAIR
(E-04) - 3 FOOT, 6 INCH MULCHER
(E-05[A]) - 4 FOOT, 9 INCH MULCHER
(E-05) - 3 FOOT, 6 INCH BAR MULCHER
(E-06[A]) - 7 FOOT, 3 INCH MULCHER
(E-06) - 6 FOOT MULCHER
(E-07[A]) - 12 FOOT, 3 INCH MULCHER
(E-07) - 9 FOOT, 9 INCH MULCHER
(E-08) - 14 FOOT, 9 INCH MULCHER
(F-02[A]) - ROD WEEDER BOOT DRIVE
(F-02) - ROD WEEDER BOOT FRAME
(F-03) - ROD WEEDER DRIVE WHEEL FRAME
(F-04) - ROD WEEDER DRIVE WHEEL & MOUNTING
(F-05) - ROD WEEDER BOOT DRIVE AND MOUNTING
(F-06) - ROD WEEDER MAIN DRIVE
(F-07) - ROD WEEDER AUXILIARY PTO DRIVE, HAYES, SPICER
(F-08[A]) - DRIVE WHEEL STOP ANGLE
(F-08) - ROD WEEDER ROD AND MOUNTING
(G-02A[A]) - C FRAME EXTENSION
(G-02A) - MAIN FRAME, 8 FOOT 6 INCH
(G-02B[A]) - VIBRA TINE GROUND WORKING TOOLS
(G-02B) - VIBRA TINE CULTIVATOR SHANK
(G-03) - GAUGE WHEEL
(G-04) - THREE POINT HITCH
(G-05[A]) - C FRAME TRUSS ROD
(G-05) - EXTENSIONS
(G-06) - 9 FOOT, 6 INCH MULCHER
(G-07) - 11 FOOT, 2 INCH MULCHER
(G-08) - 13 FOOT, 6 INCH MULCHER
(G-09) - 14 FOOT, 10 INCH MULCHER
(G-10) - SLOW MOVING VEHICLE EMBLEM, PRODUCT GRAPHICS