(5500) - INTERNATIONAL HARVESTER CHISEL PLOW (1/79-12/87)

Запчасти Case IH 5500

(A-02) - GROUND WORKING TOOLS AND SHANKS, CUSHION CLAMP AND SHANK, REGULAR CLEARANCE SHANK
(A-03) - GROUND WORKING TOOLS AND SHANKS, CUSHION CLAMP AND SHANK, HIGH LIFT REGULAR CLEARANCE SHANK
(A-04) - GROUND WORKING TOOLS AND SHANKS, RIGID CLAMP AND SHANK
(A-05) - GROUND WORKING TOOLS AND SHANKS, GROUND WORKING TOOLS
(B-02[A]) - FRAME EXTENSIONS, TWO RANK MODELS
(B-02) - MAIN FRAME, DIRECT MOUNTED, TWO RANK MODELS
(B-03[A]) - QUICK COUPLER HITCH ADAPTOR, TWO RANK MODELS
(B-03) - MAIN FRAME, DIRECT MOUNTED, THREE RANK MODELS
(B-04) - QUICK COUPLER HITCH ADAPTOR, DIRECT MOUNTED, THREE RANK MODELS
(B-05) - THREE POINT HITCH, DIRECT MOUNTED, TWO RANK MODELS
(B-06) - THREE POINT HITCH, DIRECT MOUNTED, THREE RANK MODELS
(B-07[A]) - GAUGE WHEEL MOUNTING, SLIDE ADJUSTING, DIRECT MOUNTED, MOUNTING AT FRAME END
(B-07) - GAUGE WHEEL MOUNTING, SLIDE ADJUSTING, DIRECT MOUNTED, MOUNTING FORWARD OF FRONT BEAM
(B-08) - GAUGE WHEEL AND HUB, DIRECT MOUNTED, FOUR BOLT WHEEL MOUNTING
(B-09) - GAUGE WHEEL AND HUB, DIRECT MOUNTED, SIX BOLT WHEEL MOUNTING
(B-10[A]) - SLOW MOVING VEHICLE EMBLEM
(B-10) - GAUGE WHEEL MOUNTING PARTS, DIRECT MOUNTED, CRANK ADJUSTABLE TYPE
(B-11) - PRODUCT GRAPHICS, DIRECT MOUNTED
(C-02[A]) - FRAME EXTENSIONS
(C-02) - MAIN FRAME, TRAIL BEHIND
(C-03) - DEPTH CONTROL ROCKSHAFT, TRAIL BEHIND
(C-04) - TRACTOR HITCH, TRAIL BEHIND, 7 FOOT MODEL
(C-05) - TRACTOR HITCH, TRAIL BEHIND, 10 FOOT MODEL
(C-06) - TRACTOR HITCH, TRAIL BEHIND, 13 FOOT MODEL
(C-07) - TRAILING HITCH, TRAIL BEHIND
(C-08) - AXLE AND CONNECTIONS, TRAIL BEHIND
(C-09[A]) - SAFETY CHAIN
(C-09) - MAIN WHEEL AND HUB, TRAIL BEHIND
(C-10) - HAND LIFT, TRAIL BEHIND
(C-11) - DEPTH CONTROL HYDRAULICS, TRAIL BEHIND
(C-12) - SLOW MOVING VEHICLE EMBLEM, TRAIL BEHIND
(C-13) - PRODUCT GRAPHICS, TRAIL BEHIND
(D-02) - MAIN FRAME AND HITCH, SINGLE WING
(D-03[A]) - FRAME EXTENSIONS
(D-03) - WING FRAME, SINGLE WING
(D-04) - CENTER WHEEL AND HUB, SINGLE WING
(D-05) - OUTER WHEEL AND HUB, SINGLE WING
(D-06[A]) - CENTER AXLE
(D-06) - WEIGHT TRANSFER UNIT, SINGLE WING
(D-07) - OUTER AXLE AND DEPTH CONTROL CYLINDER, SINGLE WING
(D-09) - WING LIFT HYDRAULIC SYSTEM, SINGLE WING, MACHINES BUILT 1980 THROUGH 1985
(D-11) - DEPTH CONTROL HYDRAULIC SYSTEM, SINGLE WING, MACHINES BUILT 1980 THROUGH 1985
(D-13[A]) - HYDRAULIC COUPLERS
(D-13) - DEPTH CONTROL AND WING LIFT HYDRAULIC SYSTEM, SINGLE WING, MACHINES BUILT 1986 AND SINCE
(D-14) - SAFETY CHAIN, SINGLE WING
(D-15) - SLOW MOVING VEHICLE EMBLEM, SINGLE WING
(D-16) - PRODUCT GRAPHICS, SINGLE WING
(E-02[A]) - 4 FOOT 9 INCH MULCHER, TWO BAR
(E-02) - MULCHER CARRIER ARM, MULCHER
(E-03[A]) - 7 FOOT 3 INCH MULCHER, TWO BAR
(E-03) - 6 FOOT MULCHER, MULCHERS, TWO BAR
(E-04[A]) - 12 FOOT, 3 INCH MULCHER, TWO BAR
(E-04) - 9 FOOT, 9 INCH MULCHER, MULCHER, TWO BAR
(E-05[A]) - 1 FOOT, 3 INCH MULCHER EXTENSION, THREE BAR
(E-05) - 14 FOOT, 9 INCH MULCHER, MULCHER, TWO BAR
(E-06) - MULCHER CENTER BAR, MULCHERS
(F-02) - MAIN FRAME, WING TYPE
(F-03) - WING FRAME, WING TYPE, 25 FOOT MODEL
(F-04) - WING FRAME, WING TYPE, 33 FOOT MODEL
(F-05) - TRACTOR AND SWIVEL HITCH, WING TYPE, MACHINES BUILT 1980 THROUOGH 1983
(F-06) - TRACTOR HITCH, WING TYPE, MACHINES BUILT 1984 AND SINCE
(F-07[A]) - TRAILING HITCH
(F-07) - FRAME EXTENSIONS AND BRACES, WING TYPE
(F-08) - TRACTOR HITCH JACK, WING TYPE, MACHINES BUILT 1980 THROUGH 1983
(F-09) - WING LIFT HELPER SPRING, WING TYPE
(F-10) - MAIN FRAME AXLE, WING TYPE, MACHINES WITH AXLE PIVOT THROUGH ROCKSHAFT TUBE
(F-11[A]) - WING FRAME AXLE
(F-11) - MAIN FRAME AXLE, WING TYPE, MACHINES WITH AXLE PIVOT THROUGH AXLE TUBE
(F-12) - WING FRAME DEPTH CONTROL, WING TYPE
(F-13) - WHEELS AND HUBS, WING TYPE
(F-14) - WING LIFT UNIT, WING TYPE
(F-15) - DEPTH CONTROL ROCKSHAFT, WING TYPE, MACHINES WITH AXLE PIVOT THROUGH ROCKSHAFT TUBE
(F-17) - DEPTH CONTROL ROCKSHAFT, WING TYPE, MACHINES WITH AXLE PIVOT THROUGH AXLE TUBE
(F-19) - WING LIFT HYDRAULIC SYSTEM, WING TYPE, MACHINES BUILT 1980 THROUGH 1985
(F-21) - DEPTH CONTROL HYD. SYSTEM, WING TYPE, WITH WELDED TYPE CYLINDER, MACHINES BUILT 1980 THROUGH 1985
(F-23) - DEPTH CONTROL HYD. SYSTEM, WING TYPE, WITH BOLTED TYPE CYLINDER, MACHINES BUILT 1980 THROUGH 1985
(F-25) - DEPTH CONTROL AND WING LIFT HYD. SYSTEM, WING TYPE, HYD. COUPLERS, MACHINES BUILT 1986 AND SINCE
(F-27[A]) - SAFETY CHAIN
(F-27) - ALTERNATING CHECK VALVE ASSEMBLY, WING TYPE, USE WITH DEPTH CONTROL FOR TRACTORS WITHOUT CHECK VALVE
(F-28) - SLOW MOVING VEHICLE EMBLEM, WING TYPE
(F-29) - PRODUCT GRAPHICS, WING TYPE
(G-02) - MAIN FRAME, WING TYPE
(G-03) - WING FRAME, WING TYPE
(G-04) - WING LIFT, WING TYPE
(G-05) - SECONDARY WING FRAMES AND FRONT HINGE, WING TYPE, 39 FOOT AND 45 FOOT DOUBLE FOLD
(G-06) - REAR HINGE, 45 FOOT DOUBLE FOLD, WING TYPE
(G-07) - REAR HINGE, 39 FOOT DOUBLE FOLD, WING TYPE
(G-08) - AUTOMATIC WING TRANSPORT LOCK, WING TYPE, MACHINES BUILT PRIOR TO NOVEMBER 1984
(G-10) - AUTOMATIC WING TRANSPORT LOCK, WING TYPE, MACHINES BUILT AFTER NOVEMBER 1984
(G-12) - TRACTOR HITCH, WING TYPE
(G-13[A]) - TRAILING HITCH
(G-13) - FRAME STUB EXTENSIONS AND BRACES, WING TYPE
(G-14) - MAIN FRAME AXLE, WING TYPE, MACHINES WITH AXLE PIVOT THROUGH ROCKSHAFT TUBE
(G-15) - MAIN FRAME AXLE, WING TYPE, MACHINES WITH AXLE PIVOT THROUGH AXLE TUBE
(G-16) - MAIN FRAME WHEEL AND HUB, WING TYPE
(G-17) - WING FRAME WHEEL AND HUB, WING TYPE
(G-18) - MAIN FRAME DEPTH CONTROL ROCKSHAFT, WING TYPE, MACHINES WITH AXLE PIVOT THROUGH ROCKSHAFT TUBE
(G-20) - MAIN FRAME DEPTH CONTROL ROCKSHAFT, WING TYPE, MACHINES WITH AXLE PIVOT THROUGH AXLE TUBE
(G-22) - WING FRAME DEPTH CONTROL ROCKSHAFT & AXLE, WING TYPE, MACHINES W/ AXLE PIVOT THROUGH ROCKSHAFT TUBE
(G-24) - WING FRAME DEPTH CONTROL ROCKSHAFT AND AXLE, WING TYPE, MACHINES WITH AXLE PIVOT THROUGH AXLE TUBE
(G-26) - SECONDARY WING DEPTH CONTROL ROCKSHAFT AND AXLE, WING TYPE, 45 FOOT DOUBLE FOLD
(G-28) - SECONDARY WING WHEEL AND HUB, WING TYPE, 45 FOOT DOUBLE FOLD
(G-29) - PNEUMATIC GAUGE WHEEL MOUNTING, WING TYPE
(G-30) - PNEUMATIC GAUGE WHEEL AND HUB, WING TYPE
(G-31) - WING LIFT HYDRAULIC SYSTEM, 33 FOOT WING TYPE, MACHINES BUILT 1981 THROUGH 1985
(G-33) - WING LIFT HYD. SYS., WING TYPE, 39 DOUBLE FOLD & 45 DOUBLE FOLD, MACHINES BUILT 1981 THROUGH 1985
(G-35) - DEPTH CONTROL HYDRAULIC SYSTEM, WING TYPE, 33 FOOT AND 39 FOOT DOUBLE FOLD, W/ WELDED TYPE CYLINDER
(G-36) - HYDRAULIC HOSE SUPPORT, WING TYPE
(G-37) - DEPTH CONTROL HYDRAULIC SYSTEM, WING TYPE, 33 FOOT AND 39 FOOT DOUBLE FOLD, W/ BOLTED TYPE CYLINDER
(G-39) - DEPTH CONTROL HYDRAULIC SYSTEM, WING TYPE, 45 FOOT DOUBLE FOLD, WITH WELDED TYPE CYLINDER
(G-41) - DEPTH CONTROL HYDRAULIC SYSTEM, WING TYPE, 45 FOOT DOUBLE FOLD, WITH BOLTED TYPE CYLINDER
(G-43) - DEPTH CONTROL AND WING LIFT HYDRAULIC SYSTEM, WING TYPE, 33 FOOT, MACHINES BUILT 1986 AND SINCE
(G-45) - DEPTH CONTROL AND WING LIFT HYDRAULIC SYSTEM, WING TYPE, 39 FOOT, MACHINES BUILT 1986 AND SINCE
(G-47) - DEPTH CONTROL & WING LIFT HYD. SYSTEM, WING TYPE, 39 & 45 DOUBLE FOLD, MACHINES BUILT 1986 & SINCE
(G-49[A]) - ALTERNATING CHECK VALVE ASSEMBLY, USE WITH DEPTH CONTROL FOR TRACTORS WITHOUT CHECK VALVE
(G-49) - HYDRAULIC COUPLERS, WING TYPE
(G-50[A]) - SLOW MOVING VEHICLE EMBLEM
(G-50) - SAFETY CHAIN, WING TYPE
(G-51) - PRODUCT GRAPHICS, WING TYPE