Заказать запчасти 
Запчасти Case 1150B (07) - HYDRAULIC SYSTEM
- (212) - HYDRAULIC TANK ASSEMBLIES
- (214) - EQUIPMENT BASIC HYDRAULIC CIRCUIT, HYDRAULIC PUMP TO EQUIPMENT CONTROL VALVE W/ REAR PORTED PUMP
- (216) - EQUIPMENT BASIC HYD. CONTROL CIRCUIT, HYDRAULIC PUMP TO EQUIP. CONTROL VALVE W/ SIDE PORTED PUMP
- (218) - R25852 HYDRAULIC PUMP
- (220) - R38214 HYDRAULIC PUMP, LOADER MODELS
- (222) - LOADER LIFT HYDRAULIC CIRCUIT
- (224) - LOADER BUCKET AND FELLER BUNCHER, TILT HYDRAULIC CIRCUIT
- (226) - LOADER ARM AUXILIARY HYDRAULIC CIRCUIT
- (228) - DOZER LIFT HYDRAULIC CIRCUIT
- (230) - TILT HYDRAULIC CIRCUIT (TILT DOZER), 96" (2438 MM) DOZER W/ SIDE MOUNTED TILT HYDRAULIC LINES
- (232) - TILT HYDRAULIC CIRCUIT - TILT DOZER, MODELS W/ TILT HYDRAULIC LINES AT GRILLE
- (234) - TILT HYDRAULIC CIRCUIT - TILT DOZER, GRILLE TO CYLINDER
- (236) - DOZER TILT AND PITCH HYDRAULIC CIRCUITS, VALVE TO GRILLE
- (240) - DOZER TILT AND PITCH HYDRAULIC CIRCUITS, GRILLE TO CYLINDER, USED W/R26676 & R26767 DOZING BLADES
- (242) - DIVERSION VALVE AND CONTROLS
- (244) - DOZER ANGLING HYDRAULIC CIRCUIT, USED BEFORE TRACTOR SN 7305244
- (246) - DOZER ANGLING HYDRAULIC CIRCUIT, USED TRAC. SN 7305244 & AFT, VALVE TO GRILLE - ON RH SIDE OF FRAME
- (248) - DOZER ANGLING HYDRAULIC CIRCUIT, VALVE TO GRILLE - ON LH SIDE OF FRAME
- (250) - DOZER ANGLING HYDRAULIC CIRCUIT, GRILLE TO CYLINDER
- (252) - ANGLE TILT PITCH DOZER HYDRAULIC GUARDS, USED BEFORE TRACTOR SN 7305244
- (254) - ANGLE TILT PITCH HYDRAULIC GUARDS, USED TRACTOR SN 7305244 & AFTER
- (256) - RIPPER HYDRAULIC CIRCUIT
- (258) - DUAL PULL BEHIND HYDRAULIC CIRCUITS
- (260) - G34836 AND G34837 LOADER LIFT CYLINDERS, GLAND IS STAMPED W/ CYLINDER PART NUMBER
- (262) - G33996 AND G33997 LOADER LIFT CYLINDERS, GLAND HAS NO I.D. MARKINGS
- (264) - G34765 BUCKET TILT AND FELLER BUNCHER CYLINDER, GLAND IS STAMPED W/ CYLINDER PART NUMBER
- (266) - G33995 BUCKET AND FELLER BUNCHER TILT CYLINDER, GLAND HAS NO I.D. MARKINGS
- (268) - G34638 AND G34639 BUCKET CLAM CYLINDERS, GLAND IS STAMPED W/ CYLINDER PART NUMBER
- (270) - G32278 AND G32279 BUCKET CLAM CYLINDERS, GLAND HAS NO I.D. MARKINGS
- (272) - G33934 AND G33935 DOZER LIFT CYLINDERS, TILT DOZER, GLAND IS STAMPED W/ CYLINDER PART NUMBER
- (274) - G33934 AND G33935 DOZER LIFT CYLINDERS, TILT DOZER, GLAND HAS I.D. RING
- (276) - G100085 AND G100084 DOZER LIFT CYLINDERS, TILT DOZER, GLAND IS STAMPED W/ CYLINDER PART NUMBER
- (278) - G101264 AND G101265 DOZER LIFT CYLINDERS, G103102 & G103103 DOZER LIFT CYLINDERS, TILT DOZER
- (280) - G33940 AND G33941 DOZER LIFT CYLINDERS, ANGLE TILT PITCH DOZER, GLAND IS STAMPED W/ CYLINDER PART #
- (282) - G33940 AND G33941 DOZER LIFT CYLINDERS, ANGLE TILT PITCH DOZER, GLAND I.D. RING
- (284) - G101270 & G101271 DOZER LIFT CYLINDERS, ANGLE TILT PITCH DOZER, GLAND IS STAMPED W/ CYLINDER PART #
- (286) - G33933 DOZER TILT CYLINDER, TILT DOZER, GLAND IS STAMPED W/ CYLINDER PART NUMBER
- (288) - G33933 DOZER TILT CYLINDER, TILT DOZER, GLAND IS STAMPED W/ CYLINDER PART NUMBER
- (290) - G33938 & G33939 DOZER TILT & PITCH CYLS., ANGLE TILT PITCH DOZER, GLAND IS STAMPED W/ CYL. PART #
- (292) - G33938 & G33939 DOZER TILT & PITCH CYLINDERS, ANGLE TILT PITCH DOZER, GLAND HAS NO I.D. MARKINGS
- (294) - G101268 & G101269 DOZER TILT & PITCH CYLS., ANGLE TILT PITCH DOZER, GLAND IS STAMPED W/ CYL. PART #
- (296) - G33936 & G33937 DOZER ANGLE CYLINDERS, GLAND IS STAMPED W/ CYLS. PART NUMBER
- (298) - G33936 & G33937 DOZER ANGLE CYLINDERS, GLAND HAS I.D. RING
- (300) - G35383 AND G35384 DOZER ANGLE CYLINDERS, GLAND IS STAMPED W/ CLYINDER PART NUMBER
- (302) - G101266 AND G101267 DOZER ANGLE CYLINDERS, GLAND IS STAMPED W/ CYLINDER PART NUMBER
- (304) - G34530 AND G34531 RIPPER CYLINDERS, GLAND IS STAMPED W/ CYL. PART NUMBER, 3-1/2" ID (88.9 MM) CYL.
- (306) - G34530 AND G34531 RIPPER CYLINDER, 3-1/2" (88.9 MM) ID CYLINDER
- (308) - G100272 AND G100273 RIPPER CYLINDERS, 4" ID (101.6 MM) CYL., GLAND IS STAMPED W/ CYL. PART NUMBER
- (310) - G101272 AND G101273 RIPPER CYLINDERS, GLAND IS STAMPED W/ CYLINDER PART NUMBER
- (312) - HYDRAULIC QUICK DISCONNECT COUPLINGS, FEMALE COUPLING
- (313A) - D52800 HYDRAULIC COUPLING (FEMALE)
- (314) - EQUIPMENT CONTROL VALVE AND LEVERS, LOADER RETURN-TO-DIG & HEIGHT CONTROL LINKAGE
- (316) - EQUIPMENT CONTROL VALVE AND LEVERS, ONE LEVER - 2 SPOOL VALVES ARE STAMPED W/ CASE PART NUMBER
- (320) - EQUIPMENT CONTROL VALVE AND LEVERS, TWO LEVERS - 3 SPOOL, VALVES ARE STAMPED W/ CASE PART NUMBER
- (324) - EQUIPMENT CONTROL VALVE AND LEVERS, THREE LEVER - 4 SPOOL, VALVES ARE STAMPED W/ CASE PART NUMBER
- (328) - R26131 TWO SPOOL VALVE, TILT DOZER
- (330) - R36055 TWO SPOOL VALVE, TILT DOZER
- (332[1]) - R40905 TWO SPOOL VALVE DOZER MODEL
- (332) - R40900 TWO SPOOL VALVE, LOADER MODEL
- (334) - R26132 THREE SPOOL VALVE, TILT DOZER W/ RIPPER
- (336[1]) - R36056 THREE SPOOL VALVE TILT DOZER WITH RIPPER
- (336) - R33645 THREE SPOOL VALVE, TILT DOZER WITH RIPPER
- (338) - R36058 THREE SPOOL VALVE, ANGLE TILT PITCH DOZER
- (340[1]) - R40908 THREE SPOOL VALVE ANGLE TILT PITCH DOZER
- (340) - R40906 THREE SPOOL VALVE, TILT DOZER WITH RIPPER, R40908
- (342) - R26129 THREE SPOOL VALVE, LOADER WITH RIPPER, 4-IN-1 BUCKET OR FELLER BUNCHER
- (343A) - R26130 FOUR SPOOL VALVE, LOADER WITH RIPPER AND 4-IN-1 BUCKET OR FELLER BUNCHER
- (344) - R33643 THREE SPOOL VALVE, LOADER WITH RIPPER, 4-IN-1 BUCKET OR FELLER BUNCHER
- (345A) - R33644 FOUR SPOOL VALVE, LOADER WITH RIPPER AND 4-IN-1 BUCKET OR FELLER BUNCHER
- (346[1]) - R36054 FOUR SPOOL VALVE LOADER WITH RIPPER AND 4-IN-1 BUCKET OR FELLER BUNCHER
- (346) - R36053 THREE SPOOL VALVE, LOADER WITH RIPPER, 4-IN-1 BUCKET OR FELLER BUNCHER
- (348[1]) - FOUR SPOOL VALVE LOADER WITH RIPPER AND 4-IN-1 BUCKET OR FELLER BUNCHER
- (348) - R40901 FOUR SPOOL VALVE, LOADER WITH RIPPER AND 4-IN-1 BUCKET FELLER BUNCHER
- (350) - R26133 FOUR SPOOL VALVE, TILT DOZER WITH DUAL PULL BEHIND
- (351A) - R26135 FOUR SPOOL VALVE, ANGLE TILT PITCH DOZER WITH RIPPER
- (352) - R33646 FOUR SPOOL VALVE, TILT DOZER WITH DUAL PULL BEHIND
- (353A) - R33647 FOUR SPOOL VALVE, ANGLE TILT PITCH DOZER W/ RIPPER
- (354[1]) - R36059 FOUR SPOOL VALVE ANGLE TILT PITCH DOZER WITH RIPPER
- (354) - R36057 FOUR SPOOL VALVE, TILT DOZER WITH DUAL PULL BEHIND
- (356[1]) - R40909 FOUR SPOOL VALVE ANGLE TILT PITCH DOZER WITH RIPPER
- (356) - R40907 FOUR SPOOL VALVE, TILT DOZER WITH DUAL PULL BEHIND
- (358) - R30140 VALVE SECTION (LOADER INLET/OUTLET), R30150 VALVE SECTION (DOZER INLET/OUTLET)
- (360) - R38637 INLET AND OUTLET SECTION
- (362) - D87071 INLET AND OUTLET SECTION
- (364) - R30141 BUCKET OR FELLER BUNCHER TILT SECTION
- (366) - D77559 BUCKET OR FELLER BUNCHER TILT SECTION
- (368) - N6126 BUCKET OR FELLER BUNCHER TILT SECTION
- (370) - R30145 LOADER LIFT SECTION
- (372) - D77560 LOADER LIFT SECTION
- (374) - D87084 LOADER LIFT SECTION
- (376) - R29980 AND R34024 VALVE SECTIONS
- (378) - D77565 & R38696 SECTION, RIPPER, 4-IN-1 BUCKET OR FELLER BUNCHER
- (380) - D87085 AND D87076 SECTIONS
- (382) - R30151 VALVE SECTION, DOZER ANGLE AND TILT/PITCH SECTION
- (384) - D87073 VALVE SECTION, DOZER ANGLE AND TILT/PITCH SECTION
- (386) - R30153 DOZER LIFT SECTION
- (388) - R87074 DOZER LIFT SECTION
- (390) - ANTICAVITATION VALVES AND RELIEF VALVES
- (412) - FELLER BUNCHER, HYDRAULIC LINES AND CYLINDERS
- (414) - FELLER BUNCHER CYLINDERS