Заказать запчасти 
Запчасти Case 30YC (07) - HYDRAULIC SYSTEM
- (E02) - LEVELER HYDRAULICS
- (E05) - TRACK SERVICE BRAKE SWIVEL
- (E06) - TRACK BRAKE HYDRAULICS
- (E08) - TRACK BRAKE CYLINDER
- (F06) - 4-IN-1 HYDRAULICS
- (F07) - "Y" BOOM HYDRAULICS FOR 4-IN-1
- (F09) - WRIST-O-TWIST HYDRAULICS
- (F10) - "Y" BOOM HYDRAULICS FOR WRIST-O-TWIST
- (F12) - "E" BOOM HYDRAULICS FOR WRIST-O-TWIST
- (F16) - PULPWOOD CLAM HYDRAULICS
- (G01) - RESERVOIR TO PUMP TO MID INLET AND END INLET
- (G02) - VALVE TO HOIST CYLINDER AND RETURN (FOR BOTH "Y" AND "E" BOOMS).
- (G03) - * VALVE TO CROWD CYLINDER AND RETURN FOR "Y" BOOM, (USED ON 30C UNITS WITH SERIAL NUMBER 1 - 640 AND
- (G04A) - * VALVE TO CROWD CYLINDER AND RETURN FOR "Y" BOOM, (USED ON 30C UNITS WITH SERIAL NUMBER 641 - 652
- (G04C) - VALVE TO CROWD CYLINDER AND RETURN FOR "Y" BOOM, (USED ON 30C UNITS WITH SERIAL NUMBER 653 - UP AND
- (G05) - VALVE TO CROWD CYLINDER AND RETURN FOR "E" BOOM
- (G07) - VALVE TO TOOL CYLINDER AND RETURN FOR "Y" BOOM
- (G09) - VALVE TO TOOL CYLINDER AND RETURN FOR "E" BOOM
- (G10) - * VALVE TO TOOL CYLINDER AND RETURN FOR "E" BOOM DIPPERSTICK HYDRAULICS, (USED WITH 30C UNITS WITH
- (G10A) - VALVE TO TOOL CYLINDER AND RETURN FOR "E" BOOM, DIPPERSTICK HYDRAULICS, (USED ON 30C UNITS WITH
- (G11) - MAIN VALVE TO SWING MOTOR AND RETURN
- (G12) - VALVE OUTLET TO RESERVOIR (WITH FILTER AND COOLER LINES)
- (G15) - MAIN VALVE TO SWIVEL AND RETURN FOR TRACK DRIVE MOTORS
- (G17) - SWIVEL TO TRACK DRIVE MOTORS AND RETURN
- (G18) - DRAIN LINE CIRCUIT (SWING AND TRACK MOTORS)
- (H01) - HOIST AND CROWD CYLINDER, 5-9/32" ID X 45.5" STROKE
- (H02) - TOOL CYLINDER 4-3/4" ID X 31.10 STROKE
- (H03) - 4-IN-1 CLAM CYLINDER 2-3/4" ID X 10.50" STROKE
- (H04) - PULPWOOD CLAM CYLINDER 3-1/2" ID X 9-3/4" STROKE
- (H05) - WRIST-O-TWIST CYLINDER (4" ID X 6.45 STROKE)
- (H06) - LEVELER CYLINDER
- (H07) - HYDRAULIC OIL RESERVOIR
- (H08) - HYDRAULIC MAIN PUMP (CLOCKWISE ROTATION)
- (H09) - SEVEN PORT SWIVEL, TUBES AND MOUNTING PLATES
- (H10) - HYDRAULIC VALVES INTRODUCTION - PLEASE READ!!
- (H11) - MAIN VALVE BANK ARRANGEMENT (CONTD)
- (H12) - INLET SECTION PART NUMBER 202283M1
- (H13) - WORKING SECTION PART NUMBER 201990M1
- (H14) - WORKING SECTION PART NUMBER 202913M1
- (H15) - * WORKING SECTION PART NUMBER 202948M1
- (H17) - MID INLET PART NUMBER 201991M1
- (H18) - OUTLET SECTION PART NUMBER 202819
- (H19) - INLINE PORT RELIEF VALVE (FOR HOIST CIRCUIT)
- (H20) - INLINE PORT RELIEF VALVE (FOR TOOL CIRCUIT)
- (H21) - INLINE PORT RELIEF VALVE (FOR CROWD CIRCUIT)
- (H22) - SWING, IN LINE, CROSSOVER RELIEF VALVE
- (H23) - CHECK VALVE (LEVELER), (USED ON ALL 30C UNITS AND USED ON 35C UNITS WITH SERIAL NUMBER 132 - UP)
- (H24) - *PULPWOOD CLAM ACTUATOR HOUDAILLE #410210
- (H25) - TURNTABLE SWING MOTOR
- (H26) - TRACK DRIVE MOTOR
- (H27) - HYDRAULIC OIL FILTER, 209407M1 - GRESEN #G-FA-315-NR, 209408 - GRESEN #G-FA-220-5.
- (J06) - FELLER BUNCHER HYDRAULIC TUBING FROM "Y" BOOM TO GRABBER CYLINDER AND SHEAR CYLINDER AND RETURN)
- (J07) - "Y" BOOM HYDRAULICS FOR FELLER BUNCHER
- (J09) - GRABBER ARM CYLINDER 3-1/2" ID X 9-3/4" STROKE
- (J10) - TREE SHEAR CYLINDER (6-1/4" ID X 15" STROKE)
- (J11) - HYDRAULIC LINE SWIVELS