Заказать запчасти 
Запчасти Case IH 184
- (1) - INTRODUCTION
- (3) - INTRODUCTION
- (4) - INTRODUCTION-CONTINUED
- (5) - LIST OF ABBREVIATIONS
- (A-01) - 184 PLANTER UNIT (ONE-ROW), 284 PLANTER EQUIPPED WITH FAST-HITCH
- (A-04) - MAIN FRAME, PRESS WHEEL AND SCRAPERS
- (A-05) - HOPPER BRACKET AND FEED SHAFT
- (A-07) - PLANTER ATTACHING UNIT, 184 PLANTER
- (A-08) - PLANTER ATTACHING UNIT, 184 PLANTER
- (A-09[A]) - PLANTER ATTACHING UNIT, 184 PLANTER
- (A-09) - PLANTER ATTACHING UNIT, 184 PLANTER
- (A-10) - PLANTER ATTACHING UNIT, 184 PLANTER
- (A-11[A]) - PLANTER ATTACHING UNIT, 184 PLANTER
- (A-11) - PLANTER ATTACHING UNIT, 184 PLANTER
- (A-12) - ATTACHING UNIT, PARTS REQUIRED TO ADAPT PLANTER UNIT TO 268 & 468 CULTIVATORS
- (A-13) - PRESS WHEEL TIRES
- (A-14) - GAUGE WHEEL CONTROLLED FLEXIBLE ATTACHING UNIT, FOR 2-1/4 IN. SQUARE TOOL BAR
- (A-15[A]) - DOUBLE TOOL BAR
- (A-15) - SINGLE TOOL BAR
- (A-16[A]) - FRAME JOCKEY ARCH, FOR REAR MOUNTED NO. 259 CULTIVATOR WITH NO. 184 PLANTER UNIT
- (A-16) - JOCKEY BAR
- (A-17) - SPRING LOADED ROLLING GUIDE FIN
- (A-18[A]) - SPRING LOADED DISK COVERERS
- (A-18) - ADAPTING PARTS, PARTS NECESSARY TO ADAPT COLE DUPLEX PLANTER FOR USE WITH PLANTER UNIT
- (A-19[A]) - DISK COVERS, FOR NO. 184 PLANTER UNIT
- (A-19) - SPRING LOADED WIDE BLADE COVERER
- (A-20[A]) - GAUGE WHEEL ADAPTING UNIT
- (A-20) - SEED FIRMING WHEEL
- (A-21[A]) - RUNNER OPENER
- (A-21) - DOUBLE DISK OPENER
- (A-22[A]) - DISK HILLERS, FOR NO. 184 PLANTER UNIT
- (A-22) - DISK HILLER, FOR DISK FURROWING AND BEDDING ATTACHMENTS, FOR NO. 184 PLANTER UNIT
- (A-23[A]) - REAR ROCKSHAFT UNIT POWER LIFT, FOR FARMALL CUB TRACTORS
- (A-23) - RIGID ROCKSHAFT WITH LIFT LINK, FOR FARMALL SUPER A, 100, 130 & 140 TRACTORS
- (A-24[A]) - GAUGE SHOE
- (A-24) - SHOVEL FURROWER FRICTION TRIP AND COVERING SHOVEL
- (A-25[A]) - FURROWING ATTACHMENT
- (A-25) - RUNNER WINGS AND DIRT SHIELDS
- (A-26[A]) - CLAMPS
- (A-26[B]) - BRUSH CUT-OFF UNIT, FOR USE WITH COMBINATION HOPPER
- (A-26) - CHAIN GUARD
- (A-27[A]) - SEED TUBE
- (A-27) - PRESS WHEEL BAND
- (A-28) - DISK FURROWING ATTACHMENT AND SCRAPER
- (A-29) - DISK FURROWING ATTACHMENT
- (A-30[A]) - FURROWING BAR AND EXTENSION
- (A-30) - DISK HILLER, 13 IN.
- (A-31[A]) - SEAT ATTACHMENT, FOR REAR MOUNTED 2-1/4 OR 2-1/2 SQ. TOOL BAR
- (A-31) - MARKER EXTENSION BRACKET, PARTS FOR USE WITH MARKER WHEN USING 268 & 468 CULTIVATORS
- (A-32[A]) - COMBINATION HOPPER, STRAIGHT SIDE
- (A-32) - COUPLING BEAMS
- (A-33) - COMBINATION HOPPER, OFFSET SIDE
- (A-34) - CORN AND PEA HOPPER
- (A-36) - TYPE C DUPLEX HOPPER
- (A-37[A]) - HOPPER BOTTOM GROOVED PLATE, FOR COMBINATION HOPPER
- (A-37[B]) - CORN PLANTING EQUIPMENT, FOR COMBINATION HOPPER
- (A-37) - DRIVE PLATE, FOR TYPE C DUPLEX HOPPER, WHEN USED ON COMBINATION HOPPER BRACKET
- (A-38) - CORN PLANTING EQUIPMENT, FOR TRANSLUCENT FIBERGLASS HOPPER
- (A-39) - COTTON PLANTING EQUIPMENT, FOR COMBINATION HOPPER
- (A-40[A]) - PEANUT PLANTER EQUIPMENT, 1967 AND SINCE, ONE PER ROW
- (A-40) - PEANUT PLANTING EQUIPMENT, 1966 TO 1967, ONE PER ROW
- (A-41) - SEMI-AUTOMATIC MARKER, DISK AND SHOE
- (A-42) - MARKER, TWO-ROW
- (A-43) - MARKER, FOUR-ROW
- (A-44) - UNIVERSAL MARKER UNIT, DISK-TYPE, CLOSED BEARING
- (A-45) - UNIVERSAL MARKER ADAPTING UNIT, USED WITH 268, 468, 465A CULTIVATORS & F-656 TRACTOR
- (A-46[A]) - UNIVERSAL MARKER AXLE AND SHOE
- (A-46) - UNIVERSAL MARKER UNIT, DISK-TYPE, OPEN BEARING
- (A-47) - MARKER, SHOE-TYPE, TWO-ROW
- (A-48) - SEMI-AUTOMATIC MARKER, CENTER SUPPORT
- (A-49) - SEMI-AUTOMATIC MARKER, MARKER RODS AND CHAINS
- (A-50) - PRODUCT GRAPHICS
- (YA-01) - FLAT-DROP SEED PLATES
- (YA-02) - FLAT-DROP SEED PLATES - CONTINUED / HILL-DROP SEED PLATES
- (YA-03) - EDGE-DROP SEED PLATES
- (YA-04) - EDGE-DROP SEED PLATES - CONTINUED
- (YA-05) - MISCELLANEOUS SEED PLATES
- (YA-08) - SEED PLATE TEST STAND
- (YA-09) - HOPPER AND COVER WITH INTERNATIONAL BOTTOM
- (YA-11) - ELECTRIC MOTOR
- (YA-12) - SEED MONITOR, FOR 4-ROW, 6-ROW AND 8-ROW PLANTERS