Заказать запчасти 
Запчасти Case 1455B (09) - CHASSIS/ATTACHMENTS
- (9-434) - LOADER LIFT FRAME, LIFT CYLINDERS AND SUPPORT STRUT
- (9-436) - LOADER LIFT FRAME, BUCKET CYLINDERS AND LINKS
- (9-438) - LOADER RETURN-TO-DIG, *WITH CAM-TYPE ACTUATOR SWITCH, IF USED
- (9-440) - LOADER RETURN-TO-DIG, *WITH ELECTRICAL SENSING-TYPE SWITCH, IF USED
- (9-442) - LOADER HEIGHT CONTROL, CABLE AND LINKAGE AT MAIN FRAME UPRIGHT
- (9-444) - LODR BUCKET, *W/O CORNER TEETH, 2-1/4" CUBIC YARD BCKT (1.72 CUBIC METER)
- (9-446) - LODR BCKT, *W/CORNER TEETH - TEETH USE 3/4" DIA HARDWARE, IF USED
- (9-448) - LOADER BUCKET, *WITH CORNER TEETH - TEETH USE 1" DIA 2-1/4 CUBIC YARD BCKT (1.72 CUBIC METER)
- (9-450) - LOADER CLAM BUCKET
- (9-452) - TILT DOZER, PUSH BEAMS, TILT CYLINDER AND STRUT MOUNTING
- (9-454) - TILT DOZER, BLADE AND LIFT CYLINDER MOUNTING
- (9-456) - MECHANICAL ANGLE DOZER, C-FRAME AND LIFT CYLINDERS
- (9-458) - MECHANICAL ANGLE DOZER, BLADE AND STRUTS
- (9-460) - HYDRAULIC ANGLE TILT PITCH DOZER MODELS, *C-FRAME WITH BOLT ON TRUNNION, IF USED
- (9-462) - HYDRAULIC ANGLE TILT PITCH DOZER MODELS, *C-FRAME WITH WELDED ON TRUNNION IF USED
- (9-464) - HYDRAULIC ANGLE TILT PITCH DOZER MODELS, C-FRAME AND CYLINDER MOUNTING
- (9-466) - HYDRAULIC ANGLE TILT PITCH DOZER MODELS, DOZER BLADE AND STRUTS
- (9-468) - RIPP., USED W/O 78"(1981MM) GAUGE LGP DZER MODEL, USING DRILLED & WASHER RTAINED PIN 4 SHANK MOUNTIN
- (9-470) - DRAWBARS, MODELS WITHOUT REAR MOUNTED EQUIPMENT
- (9-472) - COUNTERWEIGHTS, FRONT COUNTERWEIGHT TILT DOZER MODELS ONLY
- (9-474) - MAIN FRAME, PIVOT SHAFT, AND PULL HOOK, DOZER MODELS
- (9-476) - MAIN FRAME, PULL HOOK, AND HYDRAULIC GUARDS, LOADER MODELS
- (9-478) - UNDERCARRIAGE GUARDS, DOZER MODELS
- (9-480) - UNDERCARRIAGE GUARDS, LOADER MODELS
- (9-482) - DRIVE SHAFT GUARD AND, REAR TRANSMISSION GUARDS, MODELS WITH NO REAR EQMNT
- (9-484) - REAR TRANSMISSION GUARDS - MODELS WITH A RIPPER, USED ON MODELS W/FRONT OR REAR FILL TRANS, IF USED
- (9-486) - SEAT AND RESERVOIRS FRAME AND GUARDS
- (9-488) - RADIATOR SHROUD AND *STANDARD (BOLT-ON) GRILLE, DOZER AND DRAWBAR MODELS
- (9-490) - RADIATOR SHROUD AND *STANDARD (BOLT-ON) GRILLE, LOADER MODELS
- (9-492) - HEAVY DUTY (HINGED) GRILLE AND RADIATOR BRUSH SCREEN
- (9-494) - HOOD AND INSTRUMENT PANEL COVERS
- (9-498) - SIDE SHIELDS, DOZER AND DRAWBAR MODELS
- (9-500) - SIDE SHIELDS, LOADER MODELS
- (9-502) - BTTRY COMPARTMENT COVERS, SEAT SUPPORT, & HEEL PLATE MODEL W/TOP OR REAR FILL TANKS, ALL MODELS
- (9-504) - FLOOR PLATES
- (9-506) - NON-SUSPENSION SEAT AND SEAT BELT
- (9-508) - SUSPENSION SEAT, SEAT BELT, AND ARMRESTS
- (9-510) - SUSPENSION SEAT ASSEMBLY
- (9-514) - ROLL OVER PROTECTIVE STRUCTURE, CANOPY AND BRUSH GUARDS
- (9-516) - ROPS CANOPY BRUSH SCREENS AND EXTENSION
- (9-518) - NOISE REDUCTION PADS
- (9-520) - NOISE REDUCTION PADS
- (9-522) - CAB, MOUNTING, SEALS, AND FLOORMAT
- (9-526) - CAB, REAR SCREEN AND FUEL ACCESS, MODELS WITH TOP FILL FUEL & HYD. TANKS, IF USED
- (9-528) - CAB HINGED WINDOW & REAR SCREEN, HINGED WINDOW, IF USED
- (9-530) - CAB DOORS - WITHOUT HINGED WINDOW, IF USED
- (9-532) - CAB DOORS - WITH HINGED WINDOW, IF USED
- (9-534) - ROPS CAB GLASS, U.S. DIMENSIONS
- (9-536) - ROPS CAB GLASS, METRIC DIMENSIONS
- (9-538) - NON-PRESSURIZED CAB, HEATER CIRCUIT
- (9-540) - NON-PRESSURIZED CAB, HEATER ASSEMBLY
- (9-542) - PRESSURIZED CAB, ROOF PADS AND ACCESSORY MOUNTING BRACKETS
- (9-544) - PRESSURIZED CAB, AIR FILTER, HEADLINERS, AND DOME LAMP
- (9-546) - PRESSURIZED CAB, BLOWER HOUSING AND AIR FLOW CONTROL
- (9-548) - PRESSURIZED CAB BLOWER, (INSIDE CAB ROOF)
- (9-550) - PRESSURIZED CAB, HEATING SYSTEM
- (9-552) - PRESSURD CAB, AIR COND. SYSTEM, COVERS & MOUNTING ABOVE CAB ROOF CONDENSER, RECEIVER DRIER BLOWER &
- (9-553) - PRESSURIZED CAB, AIR CONDITIONING CONDENSER BLOWER, ABOVE CAB ROOF
- (9-554) - PRESSURIZED CAB AIR CONDITIONING CONDENSER BLOWER ABOVE CAB ROOF
- (9-556) - PRESSURIZED CAB, AIR CONDITIONING SYSTEM - INSIDE CAB ROOF EVAPORATOR CORE & CONNECTIONS
- (9-558) - PRESSURIZED CAB, AIR CONDITIONING SYSTEM, COMPRESSOR AND CONNECTIONS
- (9-560) - AIR CONDITIONING COMPRESSOR ASSEMBLY
- (9-562) - CAB, NOISE REDUCTION PADS
- (9-564) - DECALS
- (9-566) - DECALS