Запчасти Case 1455B (9-442) - LOADER HEIGHT CONTROL, CABLE AND LINKAGE AT MAIN FRAME UPRIGHT (09) - CHASSIS/ATTACHMENTS
№
Артикул
Название
Примечание
Количество
1
R40714
TUBE
CAM - height control, 4-1/2" (114 mm) OD, no longer used, order R47188 cam and R47192 bellcrank (ref. 9)
1шт.
1
R47188
TUBE
CAM - height control, 5" (127 mm) OD, must be used with R47192 bellcrank (ref. 9)
1шт.
5
BOLT,Hex, M10 x 1.5 x 41.58mm, Cl 8.8
FOLLOWER - cam, Includes: Ref. 5A
1шт.
5a
219-53
LUBE NIPPLE,65 Degree Elbow, 3/16" NPTF
FITTING - grease, 65 degree, 3/16" drive type
1шт.
9
R32127
BEARING
BELLCRANK - cam follower mounting lug is 2-1/8" (53 mm) high, no no longer used, order R47192 bellcrank and R47188 cam (ref. 1), Includes: Ref. 10
1шт.
9
R47192
TUBE
BELLCRANK - cam follower mounting lug is 1-11/16" (43 mm) high, must be used with R47188 cam (ref. 1), Includes: Ref. 10
1шт.
10
R27370
NEEDLE BEARING,0.625" ID x 0.8125" OD x 0.562"
BEARING - needle, bellcrank
2шт.
15
D43620
COLLAR
- locking, control lever, uses 5/16" set screw, no longer available, replace with D81756 collar assembly
2шт.
16
83-55
SET SCREW,Hex Soc, 5/16"-18 x 5/16", Cup Pt
If used Hex Soc, 5/16"-18 x 5/16", Cup Pt
2шт.
15
D81756
COLLAR
ASSEMBLY - locking, includes 1/4" set screw, Includes: Ref. 16
2шт.
28
R29043
ROCKER
ARM ASSEMBLY - rocker, height control, Includes: Ref. 29 and 30
1шт.
29
R47704
BRONZE BUSHING,0.753" ID x 1.003" OD x 0.50"
BUSHING - bronze, replaces needle bearing in some rocker arms
2шт.
30
219-410
LUBE NIPPLE,3/16" NPTF
location on arm may vary 3/16" x .47" lg, Drive
1шт.
Выбрано товаров: 0