Запчасти Case 570LXT (5-14) - FRONT AXLE AND SPINDLES, TWO WHEEL DRIVE MODELS (05) - STEERING
№
Артикул
Название
Примечание
Количество
1
D138954
AXLE, FRONT
AXLE ASSEMBLY, front, with single rear bushing, Includes: Ref. 2-3
1шт.
2
D137345
BUSHING,50.19mm ID x 60mm OD x 36mm L
axle, front, 36 mm, 1-13/32 inch long
1шт.
3
BUSHING,50.22mm ID x 60mm OD x 54mm L
axle, rear, 54 mm, 2-1/8 inch long
1шт.
4
SNAP RING,M50, Ext
RING heavy external retaining, No. 50, axle pivot pin retaining, front
1шт.
5
WASHER,51.6mm ID x 92mm OD x 1.98mm Thk
flat, special, used as spacer
1шт.
6
D123684
WASHER,52.3mm ID x 114mm OD x 4.78mm Thk
thrust, front, 2-1/16 x 4-1/2 x 3/16 inch
1шт.
9
219-1
LUBE NIPPLE,1/8" - 27 NPTF
FITTING grease, straight, 1/8 PT x 21/32 inch
2шт.
10
SNAP RING,M50, Ext
RING heavy external retaining, No. 50, axle pivot pin retaining, rear
1шт.
11
G107720
CYLINDER,Double Acting, 38.1mm Rod, 85.1mm Stroke
ASSEMBLY, 2WD front axle, 70, 2-3/4 inch ID x 170 mm, 6-45/64 inch stroke, parts list Figure 5-12
1шт.
12
218-5136
ELBOW,45 Degree Elbow, 3/4" - 16 Male JIC x 3/4" - 16 Male ORB
45°, 3/4-16 inch flare x adj. O-ring boss, Incl. Ref 13
2шт.
13
237-6008
O-RING,0.087" Thk x 0.644" ID, -908, Cl 6, 90 Duro
8-1, 90 Duro, .644" ID x .087" Thk
1шт.
14
13-1638
BOLT,Hex, 1" - 8 x 2-3/8", Gr 5, Full Thd
No Longer Used, Whenever Cylinder Is Service or Replaced, Always Replace Mounting Hardware With 446106A1 Bolt and D36505 Washer Hex, 1"-8 x 2 3/8", G5, Full Thd
2шт.
15
D36505
WASHER,26.99mm ID x 47.63mm OD x 2.38mm Thk
flat, special, hardened, 1-1/16 x 1-7/8 x 9/64 inch, 1-1/16 x 1-7/8 x 9/64 inch
2шт.
17
D125340
SPINDLE
ASSEMBLY, right hand, .059 inch radius, used with A61447 cone on Figure 5-16, if used.
1шт.
17a
320977A1
SPINDLE
right hand, .137 inch radius, does not include bushing, order separately, used with 296824A1 cone on Figure 5-16, for service order 335130A1 spindle which includes bushing, if used
1шт.
17b
335130A1
SPINDLE
ASSEMBLY, right hand, .137 inch radius, used with 296824A1 cone on Figure 5-16, if used
1шт.
18
D125341
SPINDLE
ASSEMBLY, left hand, .059 inch radius, not shown, used with A61447 cone on Figure 5-16, if used
1шт.
18a
303428A1
SPINDLE
left hand, .137 inch radius, not shown, does not include bushing, order separately, used with 296824A1 cone on Figure 5-16, for service order 335132A1 spindle which includes bushing, if used.
1шт.
18b
335132A1
SPINDLE
ASSEMBLY, left hand, .137 inch radius, used with 296824A1 cone on Figure 5-16, if used, Includes: Ref. 19
1шт.
21
LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF
FITTING - grease, 45º, 1/8 PT self tap x 25/32 inch
4шт.
28
A27602
THRUST BEARING,2.041" ID x 2.9475" OD x 0.635"
BEARING roller, steering knuckle, spindle
2шт.
30
LUBE NIPPLE,45 Degree Elbow, 1/8" NPTF
FITTING - grease, 45°, 1/8 PT self tap x 25/32 inch
4шт.
33
238-5139
O-RING,0.103" Thk x 2.175" ID, -139, Cl 5, 75 Duro
Kingpin seal -139, 90 Duro, 2.175" ID x .103" Thk
4шт.
34
A28230
NEEDLE BEARING,Needle, 50.78mm ID x 60.34mm OD x 25.4mm W
BEARING needle, kingpin
4шт.
D103626
PACKAGE
KIT kingpin, Incudes: Ref. 25, 28, 29, 30, 31, 32, 33, 34, 35, and 36, quantity in kit services one side of axle.
1шт.
352487A3
KIT DEPOT ASSEMBLING
KIT two wheel drive axle, Includes: Ref. 7, 14, 15, 17A, 18A, 19 thru 38
1шт.
352487A3 - per NAPO Tech Staff must order individual components. 12-23-99 jlg
1шт.
Выбрано товаров: 0