Запчасти Case 590 (9-038) - BACKHOE SWING TOWER AND BOOM (09) - CHASSIS/ATTACHMENTS

1

REF

INSTRUCTION

TOWER ASSEMBLY - backhoe swing, for correct assembly and

1шт.

NSS

NOT SOLD SEPARAT

components, see page 9-37

1шт.

2

129327A1

PIN

- swing tower to boom (replaces D149814)

2шт.

3

219-1

LUBE NIPPLE,1/8" - 27 NPTF

FITTING - grease, straight, 1/8 PT x 21/32 inch

2шт.

4

413-1224

BOLT,Hex, 3/4" - 10 x 1-1/2", Gr 5

- hex, 3/4 NC x 1-1/2 inch

2шт.

5

T53681

WASHER,19.84mm ID x 44.5mm OD x 5.559mm Thk

- flat, 20 x 44 x 6 mm, hardened

2шт.

6

D132045

SPACER,20mm ID x 31.75mm OD x 12mm L

- 25/32 inch ID x 1-1/4 inch O.D. x 1/2 inch thick

2шт.

7

D144485

SHIM,82mm ID x 98mm OD x 3.05mm Thk

Boom to swing tower 3.05mm Thk

1шт.

8

D144486

SHIM,82mm ID x 98mm OD x 1.57mm Thk

Boom to swing tower 1.57mm Thk

1шт.

9

D144171

SEAL

- grease, used with D144163 bushing, Ref. 17, if used

4шт.

10

REF

INSTRUCTION

CYLINDER ASSEMBLY - boom, for correct assembly and components, see figure 8-114 or 8-116

1шт.

11

D149812

PIN

- 174 mm long, one end tapered, boom cylinder closed end to D149864 swing tower

1шт.

11a

D151056

PIN

- 161 mm long, boom cylinder closed end to D150926 swing tower (replaces D150927)

1шт.

12

D148035

WASHER

- flat, special, if used

1шт.

13

D144486

SHIM,82mm ID x 98mm OD x 1.57mm Thk

1шт.

14

800-10075

SNAP RING,M75, Ext

RING - snap, pin retaining, right-hand side of swing tower, if used

1шт.

15

800-10080

SNAP RING,M80, Ext

RING - snap, pin retaining, left-hand side of swing tower

1шт.

16

D144443

BOOM

- backhoe, complete, includes grooved bushing used with Ref. 9 grease seal at boom to swing tower pivot, no longer available, order D150756, Ref. 16A, Serial Range: -JJG0206421

1шт.

16a

D150756

BOOM

- backhoe, complete, without grease seal at boom to swing tower pivot, Start Serial: JJG0206421

1шт.

17

D144163

BUSHING

- 80 ID x 46 mm long, with grease seal groove, D144443 boom to swing tower pivot

1шт.

17a

D151059

BUSHING,80.19mm ID x 104mm OD x 42mm L

- 80 ID x 46 mm long, without groove for grease seal, D150756 boom (replaces D150755)

2шт.

18

D144161

BUSHING,70.19mm ID x 80mm OD x 46mm L

- 70 ID x 50 mm long, left-hand side of boom at dipper cylinder closed end pivot and boom cylinder rod end pivot

4шт.

19

D144197

BUSHING,80.19mm ID x 100mm OD x 56mm L

- 80 ID x 56 mm long, with slot for groove pin, right-hand side of boom at boom to dipper pivot

1шт.

20

D144168

BUSHING,80.19mm ID x 100mm OD x 56mm L

- 80 ID x 44 mm long, without slot for groove pin, left-hand side of boom at boom to dipper pivot

1шт.

21

D120450

PLUG

- plastic

7шт.

21a

413-620

BOLT,Hex, 3/8" - 16 x 1-1/4", Gr 5

- hex, 3/8 NC x 1-1/4 inch, boom bumper, see figure 9-42, Ref. 21 for mounting

1шт.

22

REF

INSTRUCTION

CYLINDER ASSEMBLY - dipper, for correct assembly and components, see figure 8-118 or 8-120

1шт.

23

D150496

PIN

- 230 mm long, cylinder mounting (replaces D144035 226 mm long pin)

3шт.

24

D136700

SHIM,67mm ID x 83mm OD x 1.57mm Thk

- 67 mm x 83 mm x 2 mm

1шт.

25

800-40065

SNAP RING,M65, Ext

RING - snap, pin retaining

6шт.

26

D151057

PIN

- boom to dipper (replaces D149811)

1шт.

27

219-1

LUBE NIPPLE,1/8" - 27 NPTF

FITTING - grease, straight, 1/8 PT x 21/32 inch

2шт.

28

135-827

GROOVED PIN,1/2" x 3 3/4", Type E, Hardened

Pin, Grooved, 1/2" x 3 3/4", Type E, Hardened

1шт.

29

D144486

SHIM,82mm ID x 98mm OD x 1.57mm Thk

Boom to dipper 1.57mm Thk

1шт.

30

D144485

SHIM,82mm ID x 98mm OD x 3.05mm Thk

Boom to dipper 3.05mm Thk

1шт.

31

D133632

WASHER,45mm ID x 100mm OD x 8mm Thk

- flat, hardened, special

1шт.

32

D120610

NUT

- hex, 1-3/4 NF, special

1шт.

33

D136391

SHIM,72mm ID x 89mm OD x 1.57mm Thk

Dipper cylinder rod end to dipper, RH side of dipper 1.57mm Thk

1шт.

34

D136392

SHIM,72mm ID x 89mm OD x 3.05mm Thk

1шт.