Заказать запчасти 
Запчасти Case 580K (09-616) - CAB HEATER (09) - CHASSIS/ATTACHMENTS
№
Артикул
Название
Примечание
Количество
1
221-89
REDUCER,Hex, 1/2" x 3/8" NPT
1/2" x 3/8" NPT, replaces existing plugs, if used
2шт.
2
221-413
ELBOW,90 Degree, 3/8"-18, NPT
STREET ELBOW, 90 degree, 3/8" NPT, left hand side of engine, if used
1шт.
3
L17985
FITTING,3/8" - 18 NPT
NIPPLE, 3/8" NPT, left hand side of engine
1шт.
4
A16764
VALVE
SHUTOFF VALVE right hand side of engine, at water pump
1шт.
5
D136068
LARGE HOSE,0.63" ID, SAE 20R3 Class D1
HEATER HOSE -124" (3150 mm) long, Cut to required length from A42610 bulk hose, See below, LH, Mounts to heater temperature control valve 0.63" ID, SAE 20R3 Class D1
1шт.
P/N S104739 tube and P/N R54969 hose Refs. 30 and 31 are used in production with P/N D136068, 124" hose Ref. 5 for ease of pod assembly; however, Refs. 30 and 31 are not required for service if Ref. 5 hose is cut to 146" instead of 124".
1шт.
6
D132977
LARGE HOSE,0.63" ID, SAE 20R3 Class D1
HEATER HOSE - RH (116-1/8", 2950 mm long), Cut to required length from A42610 bulk hose, See below 0.63" ID, SAE 20R3 Class D1
1шт.
7
214-253
HOSE CLAMP,#10, 0.56" - 1.06", Type F Worm
CLAMP heater hoses
5шт.
8
D132982
PADDLE,26.87mm ID x 400mm L
SLEEVE hose guard
4шт.
9
R14668
CLAMP
left hand hose, uses existing mounting hardware
1шт.
10
D126742
BRACKET
hose clamp support, mounts to engine with existing hardware, if used
1шт.
11
R14668
CLAMP
hose, if used
1шт.
13
195-525
WASHER,3/8", SAE
flat, 3/8", plated
1-2шт.
14
192-21
LOCK WASHER,3/8"
WASHER, LOCK, 3/8"
1-2шт.
15
129-103
NUT,Hex, 3/8" - 16, Gr 5
NUT, 3/8"-16, G5
1-2шт.
16
D39696
CLAMP,25.40mm - 13.49mm Bolt, CTD
hose
3шт.
17
D132978
CLAMP
hose, at right hand console
1шт.
18
R52483
VALVE
temperature control, heater, see Figure 09-604 for mounting
1шт.
19
R54968
HEATER HOSE,15.50 mm ID x 205.00 mm
- Cut to required length from bulk hose, See below, Heater temperature control valve to heater inlet tube 15.50 mm ID x 205.00 mm
1шт.
20
214-254
HOSE CLAMP,#12, 0.69" - 1.25", Type F Worm
CLAMP worm screw type, hose
3шт.
21
R52504
HEATER TUBE,15.88 mm OD
TUBE heater inlet
1шт.
22
R52505
HEATER TUBE,15.88 mm OD
TUBE heater outlet
1шт.
23
R52657
CLAMP
plastic, tube, mounts on stud on ROPS post
2шт.
25
R54967
HEATER HOSE,15.50 mm ID x 70.00 mm
- Cut to required length from bulk hose 97252C1, See below, Heater core to tubes 15.50 mm ID x 70.00 mm
2шт.
97252C1
HOSE,15.875 mm ID x 15240 mm Bulk
1шт.
A42610
LARGE HOSE
HOSE bulk, 5/8", 16 mm, ID x 1", 25 mm, O.D. x 50 ft, 1524 cm, long
1шт.
26
214-254
HOSE CLAMP,#12, 0.69" - 1.25", Type F Worm
CLAMP worm screw type, hose
4шт.
27
F45415
BODY
CORE heater, mounts to cab frame
1шт.
28
187-1310
SELF-TAP SCREW,Hex Washer, 1/4" - 20 x 3/4"
SCREW hex flange head, self-tapping, 1/4" - 20 NC x 3/4", plated
4шт.
29
F45457
INSULATOR
SEAL heater and air conditioner, foam, adhesive back
1шт.
30
S104739
TUBE,0.625" OD x 3" L
5/8", 16 mm, O.D. x 3", 76 mm, long, used in production, not required for service
1шт.
P/N S104739 tube and P/N R54969 hose Refs. 30 and 31 are used in production with P/N D136068, 124" hose Ref. 5 for ease of pod assembly; however, Refs. 30 and 31 are not required for service if Ref. 5 hose is cut to 146" instead of 124".
1шт.
31
R54969
HEATER HOSE,15.50mm ID x 292mm L
Cut to Required Length from Bulk Hose, Used in Production, Not Required for Service 15.50 mm ID x 292.00 mm
1шт.
P/N S104739 tube and P/N R54969 hose Refs. 30 and 31 are used in production with P/N D136068, 124" hose Ref. 5 for ease of pod assembly; however, Refs. 30 and 31 are not required for service if Ref. 5 hose is cut to 146" instead of 124".
1шт.
32
221-1414
ELBOW,90 Degree, 1/2"-14, NPT
street, 90 degree, 1/2" NPT, galvanized, if used
1шт.
33
221-1089
REDUCER,Hex, 1/2" x 3/8" NPT
1/2" x 3/8" NPT, plated, if used
2шт.
R54970
HEATER HOSE,15.88mm ID x 15240mm Bulk
15.88 mm ID x 15240.0 mm
1шт.
Выбрано товаров: 39