Запчасти Case 480LL (344) - THREE-POINT HITCH CONTROL VALVES, FOUR AND FIVE SPOOL VALVE ASSY. D99475 & D99490 CONTROL VALVES (35) - HYDRAULIC SYSTEMS
№
Артикул
Название
Примечание
Количество
D99475
VALVE
CONTROL VALVE - hitch, four-spool, 480D only, Ref. 1 has a main relief valve, no longer used, order D122164 on Figure 344, Includes: Ref. 1 - 20
1шт.
D99490
VALVE
CONTROL VALVE - hitch, five-spool, 480LL only, Ref. 1 has a main relief valve, no longer used, order D122165 on Figure 344, Includes: Ref. 1 - 20
1шт.
N7115 auxiliary section has a flow restriction seal (see parts list Figure 356) and is always located next to the inlet-outlet section.
1шт.
3
N8691
KNIFE SECTION
SECTION - pitch, tilt, and implement, section does not include control lever and mounting, see Refs. 16-20 below, parts list Figure 356
2-3шт.
4
N7118
VALVE BLOCK
SECTION - lift, section includes control lever and mounting, parts list Figure 352, if used
1шт.
4
N8692
KNIFE SECTION
SECTION - lift, section does not include control lever and mounting, see Refs. 16-20 below, parts list Figure 354, if used
1шт.
N7028
COVER
END SECTION - cover plate, uses 7/8" - 14 NC plug, if used, Includes: Ref. 5 - 7
1шт.
7
237-6010
O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro
10-1, 90 Duro, .755" ID x .097" Thk, Plug, Used with Ref. 6
1шт.
D122553
PLATE
END SECTION - cover plate, uses 1-1/16" - 12 NC plug, if used, Includes: Ref. 8 - 10
1шт.
9
218-5158
PLUG,Hex Hd, 1 1/16"-12 ORB
Cover plate, Includes: Ref. 10 Hex Hd, 1 1/16"-12 ORB
1шт.
10
218-5008
O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 Duro
- plug, used with Ref. 9
1шт.
11
A15888
O-RING,0.801" ID x 0.941" OD x 0.07"
- between sections, 13/16" (21 mm) ID
10-12шт.
12
A62239
O-RING,0.07" Thk x 0.926" ID, -21, Cl 5, 75 Duro
- between sections, 15/16" (24 mm) ID
10-12шт.
D122164
VALVE
CONTROL VALVE - hitch, four-spool, 480D only, Ref. 21 has a plugged main relief port, if used, Includes: Ref. 21 - 36
1шт.
D122165
VALVE
CONTROL VALVE - hitch, five-spool, 480LL only, Ref. 21 has a plugged main relief port, if used, Includes: Ref. 21 - 36
1шт.
22
N8691
KNIFE SECTION
SECTION - implement, pitch, and tilt, section does not include control lever and mounting, see Refs. 32-36 below, parts list Figure 356
3-4шт.
23
N8692
KNIFE SECTION
SECTION - lift, section does not include control lever and mounting, see Refs. 32-36 below, parts list Figure 354
1шт.
25
218-5158
PLUG,Hex Hd, 1 1/16"-12 ORB
Cover plate, Includes: Ref. 26 Hex Hd, 1 1/16"-12 ORB
1шт.
27
A15888
O-RING,0.801" ID x 0.941" OD x 0.07"
- between sections, 13/16" (21 mm) ID
10-12шт.
28
A62239
O-RING,0.07" Thk x 0.926" ID, -21, Cl 5, 75 Duro
- between sections, 15/16" (24 mm) ID
10-12шт.
Выбрано товаров: 0