№
Артикул
Название
Примечание
Количество
1
D146332
ARM
FRAME - loader lift, Includes: Ref. 2 - 4
1шт.
2
D37392
BUSHING,44.68mm ID x 53.98mm OD x 31.75mm L
- loader frame pivot
4шт.
3
100696A1
BUSHING,38.41mm ID x 47.65mm OD x 28.6mm L
Bucket cylinder link pivot, Replaces D37763
4шт.
4
D30931
BUSHING,38.33mm ID x 47.63mm OD x 69.85mm L
- bucket mounting
2шт.
5
219-1
LUBE NIPPLE,1/8" - 27 NPTF
FITTING - grease, straight, 1/8 PT x 21/32 inch
8шт.
6
D129819
SHAFT
- pivot
1шт.
7
D143409
WASHER,44.86mm ID x 63.5mm OD x 3.31mm Thk
- flat
1шт.
8
D25280
SNAP RING,#175, Ext
Ring, Snap, #175, Ext
8шт.
9
D37611
PIVOT PIN,44.45mm OD x 255.59mm L
PIN - lift cylinder pivot
2шт.
10
D44881
PIN,38.1mm OD x 136.4mm L
- lift cylinder to frame, right-hand
1шт.
13
413-16104
BOLT,Hex, 1" - 8 x 6-1/2", Gr 5
- hex, 1 NC x 6-1/2 inch
2шт.
14
413-1688
BOLT,Hex, 1" - 8 x 5-1/2", Gr 5
- hex, 1 NC x 5-1/2 inch
2шт.
15
D31219
BUSHING,26.67mm ID x 38.08mm OD x 101.6mm L
SPACER - bushing
2шт.
16
495-11106
WASHER,1", SAE
- flat, 1-1/16 x 2 x 1/8 inch
4шт.
17
425-1016
NUT,1"-8, G5
- hex, 1 inch NC
4шт.
18
D90422
BUSHING
SPACER - bushing
2шт.
19
D124047
LINK
- bucket cylinder, right-hand, inner, models without clam bucket, see Ref. 45
1шт.
20
D124045
LINK
- bucket cylinder, right-hand, outer, with extra hole for antirollback rod, Includes: Ref. 22 and 23
1шт.
21
D124045
LINK
- bucket cylinder, left-hand, inner and outer, extra hole not used in left-hand position, Includes: Ref. 22 and 23
2шт.
22
219-86
LUBE NIPPLE,1/8" NPTF
FITTING - grease, straight, self-tap, 1/8 PT x 5/8 inch, one per each link
1шт.
23
D31512
BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L
- link, one per each link
1шт.
24
D126881
LINK
- bucket, may replace links without bushings on some models, replaces D120494, Includes: Ref. 25 and 26
2шт.
25
D30933
BUSHING,38.41mm ID x 47.63mm OD x 31.75mm L
- at bucket cylinder link
2шт.
26
D30931
BUSHING,38.33mm ID x 47.63mm OD x 69.85mm L
- at bucket
1шт.
27
D121194
POINTER
- right-hand inner link, models without clam bucket, see Ref. 49
1шт.
28
413-520
BOLT,Hex, 5/16" - 18 x 1-1/4", Gr 5
- hex, 5/16 NC x 1-1/4 inch
2шт.
30
425-105
NUT,5/16"-18, G5
- hex, 5/16 inch NC
2шт.
31
D89321
PIN
- bucket cylinder mounting
2шт.
32
D126717
PIN,38.1mm OD x 179.83mm L
- bucket mounting, lower
2шт.
32
D126718
PIN,38.1mm OD x 179.83mm L
- bucket mounting, lower - grease able
2шт.
33
D25279
SNAP RING,M35, Int
- retaining
12шт.
34
REF
INSTRUCTION
BUCKET - loader, see Figures 9-014 and 9-016 for buckets
1шт.
35
D126718
PIN,38.1mm OD x 179.83mm L
- bucket mounting, upper
2шт.
36
D28649
PIN
- lift cylinder to frame, left-hand, if used
1шт.
37
D143406
WASHER,38.23mm ID x 63.88mm OD x 2.9mm Thk
- spacer
1шт.
38
D25279
SNAP RING,M35, Int
RING - snap, retaining
4шт.
39
D121846
STRUT
- support, loader frame
1шт.
40
D121047
GROMMET
- support strut
2шт.
41
104824A1
PIN,12.7mm OD
lock, 1/2" diameter, Replaces D102675 and L78801 pins
1шт.
42
1340792C1
CYLINDER ASSY.
CYLINDER ASSEMBLY - loader lift, parts list Figure 8-122
2шт.
43
G101186
CYLINDER
ASSEMBLY - loader bucket, right-hand, parts list Figure 8-124
1шт.
44
G101187
CYLINDER
ASSEMBLY - loader bucket, left-hand, parts list Figure 8-124
1шт.
45
D121290
LINK
- bucket cylinder, right-hand, models with clam bucket, Includes: Ref. 46 and 48
1шт.
46
D31512
BUSHING,47.75mm ID x 57.15mm OD x 19.05mm L
- link
1шт.
47
219-86
LUBE NIPPLE,1/8" NPTF
FITTING - grease, straight, self-tap, 1/8 PT x 5/8 inch
1шт.
48
D120544
BAR
INDICATOR - bucket position
1шт.
49
D123157
SUPPORT
POINTER ASSEMBLY - right-hand inner link, models with clam bucket, Includes: Ref. 50 and 51
1шт.
50
D121194
POINTER
- gauge
1шт.
51
D120546
INDICATOR
ROD - pointer
1шт.
Выбрано товаров: 50