Запчасти Case 1086B (9-112) - LOGGER CAB GLASS (09) - CHASSIS

1

REF

INSTRUCTION

GLASS - cab, door and right side, stationary, see Figure 9-112 for dimensions

2шт.

All glass to be obtained from local source and must be 7/32 inch thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a).

1шт.

2

REF

INSTRUCTION

GLASS - cab, door and right side, moveable, see Figure 9-112 for dimensions

2шт.

All glass to be obtained from local source and must be 7/32 inch thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a).

1шт.

3

REF

INSTRUCTION

SEAL - between stationary and moveable glass, 26 inch (660 mm) long, cut from S118385 bulk roll, see below

2шт.

4

REF

INSTRUCTION

MOULDING - glass, door and cab side, 120 inch (3048 mm) long, cut from S118634 bulk roll

2шт.

5

REF

INSTRUCTION

SEAL - glass channel, 120 inch (3048 mm) long, cut from S118387 bulk roll

2шт.

6

REF

INSTRUCTION

SEAL - rubber, glass spacer, 60 inch (1524 mm) long, cut from S118386 bulk roll

2шт.

7

S118207

HANDLE

- pull, side window

2шт.

8

REF

INSTRUCTION

GLASS - cab, rear window, see page 9-112 for dimensions

1шт.

All glass to be obtained from local source and must be 7/32 inch thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a).

1шт.

9

REF

INSTRUCTION

MOULDING - rear window glass, 68.5 inch (1740 mm) long, cut from S118384 bulk roll

1шт.

10

REF

INSTRUCTION

GLASS - windshield, see page 9-112 for dimensions

1шт.

All glass to be obtained from local source and must be 7/32 inch thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a).

1шт.

11

REF

INSTRUCTION

MOULDING - windshield glass, 154 inch (3912 mm) long, cut from S118384 bulk roll

1шт.

S118384

SEAL

MOULDING - glass, bulk roll foot 50 foot (15.24 m) long

1шт.

S118385

SEAL

- glass, bulk roll, 6 foot (1.83 m) long

1шт.

S118386

SEAL

SEAL - glass spacer, bulk roll 50 foot (15.24 m) long

1шт.

S118387

SEAL

- glass, bulk roll, 11 foot (3.35 m) long

1шт.

S118634

SEAL

MOULDING - glass, 50 foot (15.24 m) bulk roll

1шт.