Запчасти Case 420C (210) - HYDRAULIC CROWN TILT BULLDOZER HYDRAULICS, LIFT CYLINDER HYDRAULICS (07) - HYDRAULIC SYSTEM

1

D25450

VALVE - control (See Figure 160 for breakdown)

1шт.

2

13-636

BOLT,Hex, 3/8" - 16 x 2-1/4", Gr 5

3шт.

3

92-6

LOCK WASHER,3/8"

3шт.

4

95-6

WASHER,3/8"

- standard wrot (7/16" I.D. x 1" O.D. x 5/64" thick)

3шт.

5

25-106

NUT,3/8"-16, G5

- hex. (3/8 - 16 NC)

3шт.

6

D26741

TUBE - L.H. front control valve port to front manifold tube

1шт.

7

D26743

TUBE - L.H. rear control valve port to rear manifold tube

1шт.

8

218-5107

90 ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 7/8" - 14 Male ORB

- male, 90 degrees (5/8" JIC x 5/8" JIC)

2шт.

237-6010

O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro

SEAL - "O"ring, 218-5107 elbow (Not shown)

1шт.

9

D26745

TUBE - manifold, front

1шт.

10

D26748

TUBE - manifold, rear

1шт.

11

D26751

BRACKET - tube

2шт.

12

38843

PLATE - clamp, when stock is exhausted, order 38331

2шт.

38331

PLATE

- clamp

2шт.

13

13-528

BOLT,Hex, 5/16" - 18 x 1-3/4", Gr 5

HHCS - 5/16 - 18 NC x 1-3/4

2шт.

14

92-5

LOCK WASHER,5/16"

2шт.

15

9635082

NUT,5/16" - 18, Gr 5

- hex. (5/16 - 18 NC)

2шт.

16

D26792

HOSE - manifold tube to lift cylinder (1/2" I.D. x 7/8" O.D. x 26")

4шт.

17

31665

COLLAR CLAMP

PLATE - clamp

4шт.

18

13-528

BOLT,Hex, 5/16" - 18 x 1-3/4", Gr 5

HHCS - 5/16 - 18 NC x 1-3/4

2шт.

19

92-5

LOCK WASHER,5/16"

2шт.

20

9635082

NUT,5/16" - 18, Gr 5

- hex. (5/16 - 18 NC)

2шт.

21

D25775

TUBE - hose to rear lift cylinder port (Cylinder with tie rods only) See D28214

2шт.

21a

D28214

TUBE - hose to rear lift cylinder port (Cylinder without tie rods only) See D25775

2шт.

22

218-485

ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 1/2" - 14 Male NPTF

- male, 90 degrees (1/2" NPT x 5/8" JIC) (Cylinder with tie rods only) See 218-5107

2шт.

22a

218-5107

90 ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 7/8" - 14 Male ORB

- male, 90 degrees (5/8" JIC x 5/8" JIC) (Cylinder without tie rods only) See 218-485

2шт.

237-6010

O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro

SEAL - "O"ring, 218-5107 elbow (Not shown)

1шт.

23

D25777

TUBE - hose to front R.H. lift cylinder port (Cylinder with tie rods only) See D28216

1шт.

23a

D28216

TUBE - hose to front R.H. lift cylinder port (Cylinder without tie rods only) See D25777

1шт.

24

33888

ELBOW - special (1/2" NPT male x 5/8" JIC male x 1/8" NPT female) (Cylinder with tie rods only) See D27782

1шт.

24a

D27782

X

ELBOW - special (5/8" JIC male x 5/8" JIC male x 1/4" NPT female) (Cylinder without tie rods only) See 33888

1шт.

237-6010

O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro

SEAL - "O"ring, D27782 elbow (Not shown)

1шт.

25

221-1

DRAIN PLUG,Sq Hd, 1/8"-27 NPTF

PLUG - pipe, 1/8" NPT square head (33888 elbow)

1шт.

25a

221-2

DRAIN PLUG,Sq Hd, 1/4"-18 NPTF

PLUG - pipe, 1/4" NPT square head (D27782 elbow)

1шт.

26

D25778

TUBE - hose to front L.H. lift cylinder port (Cylinder with tie rods only) See D28216

1шт.

26a

D28216

TUBE - hose to front L.H. lift cylinder port (Cylinder without tie rods only) See D25778

1шт.

27

218-485

ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 1/2" - 14 Male NPTF

- male, 90 degrees (1/2" NPT x 5/8" JIC) (Cylinder with tie rods only) See 218-5107

1шт.

27a

218-5107

90 ELBOW,90 Degree Elbow, 7/8" - 14 Male JIC x 7/8" - 14 Male ORB

- male, 90 degrees (5/8" JIC x 5/8" JIC) (Cylinder without tie rods only) See 218-485

1шт.

237-6010

O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro

SEAL - "O"ring, 218-5107 elbow (Not shown)

1шт.

28

D24502

BRACKET - cylinder, R.H.

1шт.

29

D24501

BRACKET - cylinder, L.H.

1шт.

30

13-1036

BOLT,Hex, 5/8" - 11 x 2-1/4", Gr 5

2шт.

30a

95-10

WASHER,5/8"

- standard wrot (11/16" I.D. x 1-3/4" O.D. x 9/64" thick) R.H. cylinder bracket upper mounting bolts (Diesel models only)

2шт.

31

13-1024

BOLT,Hex, 5/8" - 11 x 1-1/2", Gr 5, Full Thd

8шт.

32

92-10

LOCK WASHER,5/8"

WASHER, LOCK, 5/8"

10шт.

33

25-1010

NUT,5/8"-11, G5

10шт.

34

D25700

CYLINDER - dozer lift, hydraulic (R.H.) with tie rods (See Figure 206 for breakdown) when stock is exhausted, order D28219 cylinder, D28214 tube, 218-5107 elbow, D28216 tube, D27782 elbow, and 221-2 pipe plug

1шт.

35

D25699

CYLINDER - dozer lift, hydraulic (L.H.) with tie rods (See Figure 206 for breakdown) when stock is exhausted, order D28219 cylinder, D28214 tube, 218-5107 elbow, and D28216 tube

1шт.

35a

D28219

CYLINDER

- dozer lift, hydraulic (Without tie rods) See Figure 206 for breakdown (See D25699 and D25700)

2шт.

36

D24497

TRUNNION

- inner race

2шт.

219-1

LUBE NIPPLE,1/8" - 27 NPTF

FITTING - grease, straight (1/8" NPT) not shown

2шт.

37

13-648

BOLT,Hex, 3/8" - 16 x 3", Gr 5

HHCS - 3/8 - 16 NC x 3

4шт.

38

92-6

LOCK WASHER,3/8"

4шт.

39

25-106

NUT,3/8"-16, G5

- hex. (3/8 - 16 NC)

4шт.

40

D24508

PIN,31.74mm OD x 50.8mm L

- mounting, Serial Range: cylinder-trunnion

4шт.

41

219-1

LUBE NIPPLE,1/8" - 27 NPTF

FITTING - grease, straight (1/8" NPT)

4шт.

42

D24516

WASHER

- thrust, bottom (1-9/32" I.D. x 2-1/4" O.D. x 3/16" thick)

2шт.

43

32625

WASHER - thrust, top (1-9/32" I.D. x 2-1/2" O.D. x 11/64" thick) Use D24516

2шт.

44

211-17

BALL,3/4" Dia

- steel (.) 3/4" Dia

38шт.

45

D24506

PLUG

- special (7/8" - 14 NF)

2шт.

46

D26739

TUBE - R.H. front control valve port to front bulkhead union, tilt cylinder hydraulics

1шт.

47

D26737

TUBE - R.H. rear control valve port to rear bulkhead union, tilt cylinder hydraulics

1шт.

48

D25667

ELBOW

- male, 90 degrees (1/2" JIC x 5/8" JIC), tilt cylinder hydraulics

2шт.

49

237-6010

O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro

SEAL - "O"ring, D25667 elbow, tilt cylinder hydraulics

1шт.

53

32978

PLATE ASSY.

PLATE - clamp, tilt cylinder hydraulics

2шт.

54

13-520

BOLT,Hex, 5/16" - 18 x 1-1/4", Gr 5

HHCS - 5/16 - 18 NC x 1-1/4, tilt cyilnder hydraulics

1шт.

55

92-5

LOCK WASHER,5/16"

tilt cylinder hydraulics 5/16"

1шт.

56

9635082

NUT,5/16" - 18, Gr 5

- hex. (5/16 - 18 NC), tilt cylinder hydraulics

1шт.

57

50883

UNION - special bulkhead, tilt cylinder hydraulics

2шт.

58

25-1112

NUT,3/4"-16, G5

- hex. (3/4 - 16 NF), tilt cylinder hydraulics

2шт.

59

39046

GUARD - tubing, tilt cylinder hydraulics

1шт.

60

13-820

BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd

Tilt cylinder hydraulics Hex, 1/2"-13 x 1 1/4", G5, Full Thd

1шт.

61

92-8

LOCK WASHER,1/2"

tilt cylinder hydraulics 1/2"

1шт.

62

25-108

NUT,1/2"-13, G5

- hex. (1/2 - 13 NC), tilt cylinder hydraulics

1шт.

63

39180

HOSE - bulkhead union to junction block and tube assembly (1/2" I.D. x 7/8" O.D. x 18-3/4"), tilt cylinder hydraulics

2шт.

64

D28040

STEM

JUNCTION BLOCK AND TUBE ASS'Y, tilt cylinder hydraulics

1шт.

65

221-2

DRAIN PLUG,Sq Hd, 1/4"-18 NPTF

PLUG - pipe, 1/4" NPT square head, tilt cylinder hydraulics

1шт.

66

13-828

BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5

HHCS - 1/2 - 13 NC x 1-3/4, tilt cylinder hydraulics

2шт.

67

92-8

LOCK WASHER,1/2"

tilt cylinder hydraulics 1/2"

2шт.

68

37966

GUARD - tubing, tilt cylinder hydraulics

1шт.

69

13-828

BOLT,Hex, 1/2" - 13 x 1-3/4", Gr 5

HHCS - 1/2 - 13 NC x 1-3/4, tilt cylinder hydraulics

4шт.

70

92-8

LOCK WASHER,1/2"

tilt cylinder hydraulics 1/2"

4шт.

71

36801

GEAR

PLATE - clamp, tilt cylinder hydraulics

1шт.

72

13-820

BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd

Tilt cylinder hydraulics Hex, 1/2"-13 x 1 1/4", G5, Full Thd

1шт.

73

92-8

LOCK WASHER,1/2"

tilt cylinder hydraulics 1/2"

1шт.

74

37965

HOSE - junction block and tube assembly to tilt cylinder - 2 used with cylinder with tie rods (Inside tube of junction block and tube assembly to tilt cylinder tube - 1 used with cylinder without tie rods) See D28212 (1/2" I.D. x 7/8" O.D. x 19"), hyd

1-2шт.

74a

D28212

HOSE - outside tube of junction block and tube assembly to front cylinder port (Cylinder without tie rods only) See 37965 (1/2" I.D. x 7/8" O.D. x 19"), tilt hyd

1шт.

237-6010

O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro

SEAL - "O"ring, D28212 hose (Not shown), tilt cylinder hydraulics

1шт.

75

31665

COLLAR CLAMP

PLATE - clamp (Cylinder with tie rods only) See D28020, tilt hydraulics

2шт.

75a

D28020

PLATE - clamp (Cylinder without tie rods only) See 31665, tilt hydraulics

2шт.

76

13-528

BOLT,Hex, 5/16" - 18 x 1-3/4", Gr 5

HHCS - 5/16 - 18 NC x 1-3/4, tilt hydraulics

1шт.

77

92-5

LOCK WASHER,5/16"

tilt cylinder hydraulics 5/16"

1шт.

78

9635082

NUT,5/16" - 18, Gr 5

- hex. (5/16 - 18 NC), tilt cylinder hydraulics

1шт.

79

218-456

HYD CONNECTOR,3/4" - 16 Male JIC x 1/2" - 14 Male NPTF

ADAPTER - straight, front tilt cylinder port (1/2" NPT x 1/2" JIC) cylinder with tie rods only, hydraulics

1шт.

80

39618

CABLE TERMINAL

TUBE - hose to rear tilt cylinder port (Cylinder with tie rods only) See D28211, hydraulics

1шт.

80a

D28211

TUBE

- hose to rear tilt cylinder port (Cylinder without tie rods only) See 39618, hydraulics

1шт.

81

218-493

ELBOW,90 Degree Elbow, 3/4" - 16 Male JIC x 1/2" - 14 Male NPTF

- male, 90 degrees (Rear tilt cylinder port) (1/2" NPT x 1/2" JIC) cylinder with tie rods only (See D23973), hydraulics

1шт.

81a

D23973

ELBOW - male, 90 degrees (Rear tilt cylinder port) (1/2" JIC x 5/8" JIC) cylinder without tie rods only (See 218-493), hydraulics

1шт.

237-6010

O-RING,0.097" Thk x 0.755" ID, -910, Cl 6, 90 Duro

SEAL - "O"ring, D23973 elbow (Not shown), tilt cylinder hydraulics

1шт.

81b

38160

LINE

CYLINDER - dozer tilt, hydraulic (With tie rods) See Figure 224 for breakdown (When stock is exhausted, order D28218 cylinder, 218-560 connector, and D23973 elbow) See D28218

1шт.

81c

D28218

CYLINDER ASSY.

CYLINDER - dozer tilt, hydraulic (Without tie rods) See Figure 224 for breakdown (See 38160)

1шт.

82

39631

FLEXIBLE HOSE

GUARD - tilt cylinder, front, hydraulics

1шт.

83

39634

HOSE

Guard, Tilt Cylinder, Rear, Hydraulics

1шт.

84

13-812

BOLT,Hex, 1/2" - 13 x 3/4", Gr 5

HHCS - 1/2 - 13 NC x 3/4, tilt cylinder hydraulics

6шт.

85

92-8

LOCK WASHER,1/2"

tilt cylinder hydraulics 1/2"

6шт.