Запчасти Case 850H (09-29) - CAB - GLASS, METRIC DIMENSIONS (09) - CHASSIS
№
Артикул
Название
Примечание
Количество
All Glass to be obtained from local source and must be 6 mm (7/32 in) thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a).
1шт.
All Glass to be obtained from local source and must be 6 mm (7/32 in) thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a).
1шт.
All Glass to be obtained from local source and must be 6 mm (7/32 in) thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a).
1шт.
All Glass to be obtained from local source and must be 6 mm (7/32 in) thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a).
1шт.
All Glass to be obtained from local source and must be 6 mm (7/32 in) thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a).
1шт.
All Glass to be obtained from local source and must be 6 mm (7/32 in) thick laminated safety glass (as described in S.A.E. J674), heat absorbing and with 70 to 75 percent light transmission. Sharp edges due to cutting must be finished to a number 4 or 5 edge (as described in S.A.E. J673a).
1шт.
Выбрано товаров: 0