Запчасти Case 1450B (5-190) - TRACK GUARDS (11) - TRACKS/STEERING

1

R43642

GUIDE

TRACK GUARD - front; left-hand track-outer, right-hand track - inner

2шт.

2

R43643

GUIDE

TRACK GUARD - front; right-hand track-outer, left-hand track - inner

2шт.

3

R44253

GUIDE

TRACK GUARD - center, loader and 74" (1880 mm) gauge dozer models

4шт.

4

R44251

GUIDE

TRACK GUARD - center; left-hand track-outer, right-hand track - inner, 78" (1981 mm) gauge LGP dozer models

2шт.

5

R44250

GUIDE

TRACK GUARD - center; right-hand track-outer, left-hand track - inner 78" (1981 mm) gauge LGP dozer models, not shown

2шт.

6

R43637

GUIDE

TRACK GUARD - rear, short, left-hand track-inner, right-hand track - outer (Requires 1 - 2)

1-2шт.

For loader models, see Figure 5-170 for identification of loader track frame. If loader frame with outer channel longer than inner channel is used, you will need Refs. 8 and 9 above in the outer positions and Refs. 6 and 7 in the inner positions. If loader frame with channels of equal length is used, you will need only the short track guards, Refs. 6 and 7 above, as described.

1шт.

7

R43638

GUIDE

TRACK GUARD - rear, short, left-hand track-outer, right-hand track - inner (Requires 1 - 2)

1-2шт.

For loader models, see Figure 5-170 for identification of loader track frame. If loader frame with outer channel longer than inner channel is used, you will need Refs. 8 and 9 above in the outer positions and Refs. 6 and 7 in the inner positions. If loader frame with channels of equal length is used, you will need only the short track guards, Refs. 6 and 7 above, as described.

1шт.

8

R43632

GUIDE

TRACK GUARD - rear, long, outer, left-hand track, loader models, not shown, if used

1шт.

For loader models, see Figure 5-170 for identification of loader track frame. If loader frame with outer channel longer than inner channel is used, you will need Refs. 8 and 9 above in the outer positions and Refs. 6 and 7 in the inner positions. If loader frame with channels of equal length is used, you will need only the short track guards, Refs. 6 and 7 above, as described.

1шт.

9

R43633

GUIDE

TRACK GUARD - rear, long, outer, right-hand track, loader models, if used

1шт.

For loader models, see Figure 5-170 for identification of loader track frame. If loader frame with outer channel longer than inner channel is used, you will need Refs. 8 and 9 above in the outer positions and Refs. 6 and 7 in the inner positions. If loader frame with channels of equal length is used, you will need only the short track guards, Refs. 6 and 7 above, as described.

1шт.

10

13-1224

BOLT,Hex, 3/4" - 10 x 1-1/2", Gr 5

Use with Loctite (Requires 44 - 48) Hex, 3/4"-10 x 1 1/2", G5

48шт.

11

T53681

WASHER,19.84mm ID x 44.5mm OD x 5.559mm Thk

- special (Requires 44 - 48)

48шт.

12

113-417

BOLT,Hex, 1/2" - 13 x 1-1/4", Gr 5, Full Thd

8шт.

13

D64050

WASHER

- hardened, 1/2"

8шт.

14

R43651

SPACER

- track guards

8шт.

15

13-12192

BOLT,Hex, 3/4" - 10 x 12", Gr 5

- hex head, 3/4" - 10 NC x 12"

10шт.

16

D34666

WASHER,33.34mm ID x 63.5mm OD x 2.38mm Thk

- hardened, 3/4"

20шт.

17

R28978

SPACER

- track guards

10шт.

18

131-657

LOCK NUT,3/4"-10, GB

NUT - hex, self-locking, 3/4" - 10 NC

10шт.

19

R43644

COVER ASSY

COVER - track guard, 4 used on dozer models and 1455B loader models, 2 used on 1450B loader models, in the outer position on both tracks (Requires 2 - 4)

2-4шт.

For loader models, see Figure 5-170 for identification of loader track frame. If loader frame with outer channel longer than inner channel is used, you will need Refs. 8 and 9 above in the outer positions and Refs. 6 and 7 in the inner positions. If loader frame with channels of equal length is used, you will need only the short track guards, Refs. 6 and 7 above, as described.

1шт.

20

R43645

COVER

- track, used on 1450B loader models only, if used

2шт.

For loader models, see Figure 5-170 for identification of loader track frame. If loader frame with outer channel longer than inner channel is used, you will need Refs. 8 and 9 above in the outer positions and Refs. 6 and 7 in the inner positions. If loader frame with channels of equal length is used, you will need only the short track guards, Refs. 6 and 7 above, as described.

1шт.

21

13-1024

BOLT,Hex, 5/8" - 11 x 1-1/2", Gr 5, Full Thd

Use with Loctite 242 Hex, 5/8"-11 x 1 1/2", G5, Full Thd

24шт.

22

T53567

BEARING WASHER,16.66mm ID x 33.33mm OD x 3.43mm Thk

WASHER - hardened, 5/8"

24шт.