Запчасти Case IH STEIGER (08-16) - CONTROL VALVE (07) - HYDRAULICS
№
Артикул
Название
Примечание
Количество
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
50-1977T91
PLATE
Left Cover (incl Ref. 2) (Casting No. 8398), use in 50-1396T91, 50-1397T91 and 50-1398T91 only
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
Tractors built between Apr. '79 (approx.) and Jan. '81 had the pressure in the control valve relief assy. set at 3000 psi (stamped on relief valve cap); tractors built before and after had it set at 2250. It is recommended that those tractors (set at 3000 psi) be serviced with the current 18-1703 (2250) relief assy. or current valve (the 01-2363T91 and 01-2364T91 were 3000 psi). Pressures also changed in the main relief valve and the priority valve as shown in Figures 08-12 and 08-13. See the notes in t
1шт.
50-1978T91
ASSEMBLY
Relief Assy, 2250 psi (incl 3-12), use in 50-1396T91, 50-1397T91 and 50-1398T91 only
1шт.
13
18-1716
KNIFE SECTION
Section, Float (incl Refs. 14, 15, 27, 36, 40 & 44-46)
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
50-1979T91
HYD VALVE SECTION
(same as above), use in 50-1398T91, 50-1396T91 and 50-1397T91 valves and can also be used as a replacement for P/N 18-1716.
1шт.
Use in the above valves & can also be used as a replacement for the P/N directly above it.
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
Use in the above valves & can also be used as a replacement for the P/N directly above it.
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
18-712
SCREW
use in 50-1398T91, 50-1396T91 and 50-1397T91 valves and can also be used as a replacement for the part number directly above it
2шт.
3-Pt. Relief Cartridge P/N 01-5974 replaces the load check plug on the control valve and is used to limit the down force on the 3-Pt. lift cylinders to 500 psi
1шт.
47
1-3524
HYD VALVE SECTION
Section, Detent (incl Ref. 14, 27, 36, 40 & 8) (see Ref. 79)
3шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
50-1981T91
HYD VALVE SECTION
(same as above), use in 50-1398T91, 50-1396T91 and 50-1397T91 valves and can also be used as a replacement for P/N 1-3524
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
Use in the above valves & can also be used as a replacement for the P/N directly above it.
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
50-2038T91
LEVER
Positioner Assy (Late Style). use in 50-1398T91, 50-1396T91 and 50-1397T91 valves and can also be used as a replacement for P/N 1-3549
1шт.
Use in the above valves & can also be used as a replacement for the P/N directly above it.
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
The "Wet" Detent Ref. 48A was used on tractors prior to Mar. '77 (unless replaced). It can be serviced with Seal Kit P/N 18-983 which includes the 4 internal O-rings marked with "A" or service kit 18-1748 which includes 18-983 plus items marked with "B".
1шт.
50
NSS
NOT SOLD SEPARAT
Ring, BU (in Refs. 79 & 80) (49 & 50 are same as 41 & 42)
3шт.
75
2-4786T1
SEAL KIT
Kit, Load Check (incl 1 ea Refs. 29-31 & 33; 2 ea Ref. 32) (is Part of Refs. 76 & 79)
1шт.
76
18-962
SEAL KIT
Kit, Complete for all Float Banks, or Spool portion of Wet Detent Bank (casting #6721) (incl 2 of Ref. 75, 1 ea Refs. 25, 26, 40, 46 & 81)
1шт.
78
18-1418
SEAL KIT
Seal Kit, Relief body (incl Refs. 5, 6, 11 & 12) (use w/casting #1862 before June 81)
1шт.
50-2039T1
SEAL KIT
(same as above) (use w/casting #8398 after June 81), use in 50-1396T91, 50-1397T91 and 50-1398T91 only
1шт.
79
35-1059
SEAL KIT
Kit, Complete for Detent Section w/Ref. 48 (incl 1 ea Refs. 57, 80, 81 & 2 of 75) (use on all after Mar 77) (casting #8072 or 7697)
1шт.
80
50-2050T1
SEAL KIT
Kit for Positioner Ref. 48 (incl Refs. 49, 50, 67 & 68) (use w/casting #8072 or 7697)
1шт.
Seal Kit P/N 35-1277T91 has been replaced by P/N 50-2050T1 as the correct seal kit for Ref. 48 (Superseded-Old P/N is not used any longer; the new P/N is to be used in all cases. Old P/N should be removed from existing inventory. It is recommended that the old part not be used under any circumstances.
1шт.
The "Wet" Detent Ref. 48A was used on tractors prior to Mar. '77 (unless replaced). It can be serviced with Seal Kit P/N 18-983 which includes the 4 internal O-rings marked with "A" or service kit 18-1748 which includes 18-983 plus items marked with "B".
1шт.
40
18-878
SEAL
Kit (incl 1 ea Refs. 41-43) (note that Refs. 49 & 50 are same as 41 & 42)
1шт.
3 to 4 Bank Kit P/N 35-1367T91 can be used prior to S/N2000 but it contains the earlier style Pioneer couplers. The 4 to 5 Bank Kit P/N 35-1014 contains the Seymour coupler and should be used up only on early tractors. The new kits will work anywhere even though the hoses are longer than necessary for tractors before S/N2000.
1шт.
Superseded - Old P/N CAN be used on all models prior to S/N break only. New P/N MUST be used after S/N break. Order new P/N when old stock is depleted as it will work for all.
1шт.
3 to 4 Bank Kit P/N 35-1367T91 can be used prior to S/N2000 but it contains the earlier style Pioneer couplers. The 4 to 5 Bank Kit P/N 35-1014 contains the Seymour coupler and should be used up only on early tractors. The new kits will work anywhere even though the hoses are longer than necessary for tractors before S/N2000.
1шт.
Superseded - Old P/N CAN be used on all models prior to S/N break only. New P/N MUST be used after S/N break. Order new P/N when old stock is depleted as it will work for all.
1шт.
Выбрано товаров: 0