Запчасти Case IH STEIGER (10-09) - MODEL 602 AND 605 DOZER FRAME Options & Miscellaneous

1

1-5911

X

SIDE ATTACHMENT, RH (Early)

1шт.

#56-012 Aspirator Kit (C11) is 5"

1шт.

The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.

1шт.

2-2556

MOUNTING PARTS

SIDE ATTACHMENT, RH (Late)

1шт.

1-5916

X

SIDE ATTACHMENT, LH (Early)

1шт.

2-2556

MOUNTING PARTS

SIDE ATTACHMENT, LH (Late)

1шт.

2

38-845

A-FRAME

1шт.

The A-Frame, ref. 2, has been modified, although the part number has remained the same. The early style had a single ear for the top mount for the lift cyls. while the later has 2. This requires a different bolt & nut to replace the pin & hairpin used with the single ear in case a new A-Frame should be needed. It also has a different mount ear for the transport lock. See the hyd. figure for the different pins or bolts.

1шт.

3

2-2013

DRAWBAR

(E) DRAWBAR (Replaces 38-846)

1шт.

#56-012 Aspirator Kit (C11) is 5"

1шт.

4

38-859

PIN

drawbar

1шт.

5

38-847

HINGE PLATE

1шт.

#56-012 Aspirator Kit (C11) is 5"

1шт.

6

38-848T1

FRAME

A-FRAME EXTENSION (Replaces 38-848)

1шт.

The A-Frame extension has been modified with a different mount for the newer style transport lock. As it is the only available for service, the new style transport lock & mount pins would also be needed. It would also require that the new ears, Part #02-1830, be welded to the A-Frame so that the new lock could be attached at that end.\n(E) Superseded - Old part number is not used any longer; the new part number is to be used in all cases.

1шт.

7

38-851

PIN, pivot (2-1/6" x 14")

1шт.

8

19-279

BOLT,Hex, 3/8" - 16 x 3", Gr 5

CAPSCREW, 3/8" x 3" NC

2шт.

9

232-4136

LOCK NUT,3/8"-16, GC

3/8" NC

6шт.

10

19-1087

BOLT,Hex, 3/4" - 10 x 3", Gr 8

CAPSCREW, 3/4 x 3 NC

4шт.

11

19-832

BOLT

NUT, 3/4" NC

4шт.

11a

19-121

LOCK WASHER,3/4"

3/4"

4шт.

12

19-1120

BOLT,1" - 8 x 8", Gr 8

CAPSCREW, 1" x 8" NC, gr. 8

6шт.

13

19-610

NUT,1"-8, G5

1" NC

8шт.

14

19-122

LOCK WASHER,1"

(omitted on later models) 1"

8шт.

15

19-714

WASHER,1", SAE

FLAT WASHER

16шт.

16

19-21

BOLT,Hex, 3/8" - 16 x 2", Gr 5

CAPSCREW, 3/8" x 2" NC

1шт.

17

19-121

LOCK WASHER,3/4"

3/4"

8шт.

The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.

1шт.

19-2975

WASHER

FLAT WASHER, 7/8"

36шт.

The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.

1шт.

18

19-63

BOLT,Hex, 3/4" - 10 x 2 1/2", Gr 5

CAPSCREW, 3/4" x 2-1/2" NC

8шт.

The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.

1шт.

19-420

BOLT,7/8" - 9 x 3", Gr 8

CAPSCREW, 7/8" x 3" NC GR. 8

18шт.

The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.

1шт.

19

19-2692

PIN, 1/2" x 1-3/4" (Use w/01-2571)

2шт.

1-7803

PIN

1-1/2" x 3-1/2" (Use w/01-7800)

2шт.

20

19-5400

PIN

HAIRPIN, 1/8" (Use w/01-2571)

2шт.

19-345

PIN

KLIK PIN, 7/16" (Use w/01-7800)

2шт.

21

1-2571

LINK, transport (Single strap-type w/1/2" holes used on earliest style dozers)

2шт.

1-7800

LINK

transport (Double strap-type w/1-1/2" holes used on later style dozers)

2шт.

22

19-841

BOLT,Hex, 1" - 8 x 9", Gr 8

CAPSCREW, 1" x 9" NC (Used on later models)

2шт.

19-1120

BOLT,1" - 8 x 8", Gr 8

CAPSCREW, 1" x 8" NC (Used on early model)

2шт.

23

19-832

BOLT

NUT, 3/4" NC

8шт.

The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.

1шт.

19-457

NUT,7/8"-9, G5

7/8" NC

18шт.

The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.

1шт.