Запчасти Case IH STEIGER (10-07[1]) - CYLINDERS WITH SNAP RING ROD GUIDE, CONSISTS OF REF. NUMBERS 14-23 Options & Miscellaneous
![Схема запчастей Case IH STEIGER - (10-07[1]) - CYLINDERS WITH SNAP RING ROD GUIDE, CONSISTS OF REF. NUMBERS 14-23 Options & Miscellaneous](https://partsell.ru/storage/images/caseih/1229017.png)
№
Артикул
Название
Примечание
Количество
The only replacement cyls. available have o-ring ports so 2 of the 31-385 adapters must be ordered in cases where a cyl. w/pipe thread is being replaced. The current replacement cyl. is the 50-1058T91 shown on the following page, however any shown here may be used if available.
1шт.
Cyl. 01-4194 differs from the other 2 only in that the OD of the rod & ID of the rod guide are .005 larger to allow better sealing. In cases where both of these (items 2 & 4) are needed to service the 18-1152 or 18-1153 cyls. order 01-4245 & 01-4244.
1шт.
Shells w/pipe thread should be serviced by ordering the o-ring style plus 2 of the 31-385 adapters. Cylinder identification: 1. Most cyls. have part # stamped on the shell clevis, but if not, check the style of rod guide (threaded or snap ring style) which will determine which of the 2 styles of cyls. that you have. Shells can then be determined by checking the ports.
1шт.
Cyl. 01-4194 differs from the other 2 only in that the OD of the rod & ID of the rod guide are .005 larger to allow better sealing. In cases where both of these (items 2 & 4) are needed to service the 18-1152 or 18-1153 cyls. order 01-4245 & 01-4244.
1шт.
Cyl. 01-4194 differs from the other 2 only in that the OD of the rod & ID of the rod guide are .005 larger to allow better sealing. In cases where both of these (items 2 & 4) are needed to service the 18-1152 or 18-1153 cyls. order 01-4245 & 01-4244.
1шт.
The only replacement cyls. available have o-ring ports so 2 of the 31-385 adapters must be ordered in cases where a cyl. w/pipe thread is being replaced. The current replacement cyl. is the 50-1058T91 shown on the following page, however any shown here may be used if available.
1шт.
Shells w/pipe thread should be serviced by ordering the o-ring style plus 2 of the 31-385 adapters. Cylinder identification: 1. Most cyls. have part # stamped on the shell clevis, but if not, check the style of rod guide (threaded or snap ring style) which will determine which of the 2 styles of cyls. that you have. Shells can then be determined by checking the ports.
1шт.
Выбрано товаров: 0