Запчасти Case IH STEIGER (10-09) - MODEL 602 AND 605 DOZER FRAME Options & Miscellaneous
№
Артикул
Название
Примечание
Количество
The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.
1шт.
The A-Frame, ref. 2, has been modified, although the part number has remained the same. The early style had a single ear for the top mount for the lift cyls. while the later has 2. This requires a different bolt & nut to replace the pin & hairpin used with the single ear in case a new A-Frame should be needed. It also has a different mount ear for the transport lock. See the hyd. figure for the different pins or bolts.
1шт.
The A-Frame extension has been modified with a different mount for the newer style transport lock. As it is the only available for service, the new style transport lock & mount pins would also be needed. It would also require that the new ears, Part #02-1830, be welded to the A-Frame so that the new lock could be attached at that end.\n(E) Superseded - Old part number is not used any longer; the new part number is to be used in all cases.
1шт.
The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.
1шт.
The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.
1шт.
The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.
1шт.
The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.
1шт.
21
1-2571
LINK, transport (Single strap-type w/1/2" holes used on earliest style dozers)
2шт.
1-7800
LINK
transport (Double strap-type w/1-1/2" holes used on later style dozers)
2шт.
22
19-841
BOLT,Hex, 1" - 8 x 9", Gr 8
CAPSCREW, 1" x 9" NC (Used on later models)
2шт.
The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.
1шт.
The side attachments, refs. 1, have an early & a later version. The later style, 02-2556, can be used as a replacement for the early; however, the mount hardware, refs. 17, 18, & 23, are 7/8" instead of 3/4" & the number required is 18 rather than 8, which means that extra holes must be drilled.
1шт.
Выбрано товаров: 0