Запчасти Case IH ST350 (04-03) - ENGINE AND ATTACHING PARTS, CAT 3306 (04) - Drive Train
№
Артикул
Название
Примечание
Количество
Superseded - Old P/N MUST be used on models prior to S/N break. New P/N will fit models after the S/N break only.
1шт.
Superseded - Old P/N MUST be used on models prior to S/N break. New P/N will fit models after the S/N break only.
1шт.
Superseded - Old P/N CAN be used on all models prior to S/N break only. New P/N MUST be used after S/N break. Order new P/N when old stock is depleted as it will work for all.
1шт.
Superseded - Old P/N CAN be used on all models prior to S/N break only. New P/N MUST be used after S/N break. Order new P/N when old stock is depleted as it will work for all.
1шт.
Superseded - Old P/N MUST be used on models prior to S/N break. New P/N will fit models after the S/N break only.
1шт.
Superseded - Old P/N CAN be used on all models prior to S/N break only. New P/N MUST be used after S/N break. Order new P/N when old stock is depleted as it will work for all.
1шт.
Superseded - Old P/N CAN be used on all models prior to S/N break only. New P/N MUST be used after S/N break. Order new P/N when old stock is depleted as it will work for all.
1шт.
4
6-135
SET OF BELTS,0.33" W x 63.50" L
V-Belt (3), Fan & Alt (w/26" Fan) 0.33" W x 63.50" L
1шт.
ST225 S/N 109-00328 & ST250 S/N 104-01000 & up have 30" fan as standard & use Belt Set 90-1502T1. All other tractors use 06-135 unless the 35-1305T91 30" Fan Kit has been installed. 35-1305T91 30" Fan Kit for increased cooling, includes fan, radiator shroud, belts, pulley & necessary mounting hardware. This kit will not fit ST250 prior to S/N 104-00331 nor ST270 prior to S/N 105-00554.
1шт.
90-1502T1
V-BELT,0.53" W x 69.00" L
3 Belt set, Fan & Alt (w/30" Fan) 0.53" W x 69.00" L
1шт.
ST225 S/N 109-00328 & ST250 S/N 104-01000 & up have 30" fan as standard & use Belt Set 90-1502T1. All other tractors use 06-135 unless the 35-1305T91 30" Fan Kit has been installed. 35-1305T91 30" Fan Kit for increased cooling, includes fan, radiator shroud, belts, pulley & necessary mounting hardware. This kit will not fit ST250 prior to S/N 104-00331 nor ST270 prior to S/N 105-00554.
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
Tractors between S/N 2000 & 2759 do not have the new mounts, Ref. 15A and 23. If replacement is needed on these tractors, these mounts must be ordered as a set (both of Ref. 15A & 90-4386T1 in Ref. 23). This will move the engine forward slightly, which will ease strain on the top driveshaft and the transfer case yoke.
1шт.
Tractors between S/N 2000 & 2759 do not have the new mounts, Ref. 15A and 23. If replacement is needed on these tractors, these mounts must be ordered as a set (both of Ref. 15A & 90-4386T1 in Ref. 23). This will move the engine forward slightly, which will ease strain on the top driveshaft and the transfer case yoke.
1шт.
Superseded - Old P/N is not used any longer, the new P/N is to be used in ALL cases. Old P/N should be removed from existing inventory. It is recommended that the old part not be used under any circumstances.
1шт.
Superseded - Old P/N MUST be used on models prior to S/N break. New P/N will fit models after the S/N break only.
1шт.
Tractors between S/N 2000 & 2759 do not have the new mounts, Ref. 15A and 23. If replacement is needed on these tractors, these mounts must be ordered as a set (both of Ref. 15A & 90-4386T1 in Ref. 23). This will move the engine forward slightly, which will ease strain on the top driveshaft and the transfer case yoke.
1шт.
Выбрано товаров: 0