Заказать запчасти 
Запчасти Case IH ST270 (04-51) - AXLE ASSEMBLY, S-34 (04) - Drive Train
№
Артикул
Название
Примечание
Количество
16-1330
Axle, Front (Early 19120) consists of Refs. 1-40
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
1-1420
Axle, Front (23120)
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
1-5499
FRONT AXLE
Axle, Front (Late 19120)
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
90-4010T91
Axle, Front (23120 w/Rolled Splines)
1шт.
16-1331
Axle, Rear (Early 19120)
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
1-1421
Axle, Rear (23120)
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
1-5502
Axle, Rear (Late 19120)
1шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
1-1413
Axle Assy w/o Diff Assy (Cut Splines), consists of Refs. 1-33
2шт.
90-1821T91
Axle Assy w/o Diff Assy (Rolled Splines)
1шт.
1
1-1357
ROLLER BEARING,133.35mm ID x 39.69mm W
Cone, Bearing, See note on 4-52
4шт.
See note on 4-52. The 02-1097 hub (Ref. 21) may no longer be available. If so it can be serviced w/kit 35-1567T91 which incl. a 90-1825T2 hub and new other hub bearings to replace Refs. 1 & 2. These are a 16-
1шт.
2
1-1358
BEARING CUP,190.5mm OD x 33.34mm W
Cup, Bearing, See note on 4-52
4шт.
See note on 4-52. The 02-1097 hub (Ref. 21) may no longer be available. If so it can be serviced w/kit 35-1567T91 which incl. a 90-1825T2 hub and new other hub bearings to replace Refs. 1 &
1шт.
3
1-1394
THRUST WASHER
Thrust
2шт.
4
1-1355
BUTTON
Thrust
2шт.
5
1-1356
STRIP
Tab, Locking
6шт.
6
1-1360
CLIP,ELECTRICAL
Clip, Retaining
6шт.
7
1-1361
WASHER
2шт.
8
1-1393
BALL
6шт.
9
90-3839T1
SEAL
(01-1351)
2шт.
Superseded - Old P/N can be used for all models, but order new P/N when stock is depleted.
1шт.
35-1346T91
SEAL
Wear Sleeve Kit (Repair grooved spindle)
2шт.
Not needed if P/N 90-3839T1 is used
1шт.
11
1-1349
NUT
2шт.
12
1-1363
LOCK WASHER
Washer (.075 thick), See note on 4-52
2шт.
See note on 4-52. The 02-1097 hub (Ref. 21) may no longer be available. If so it can be serviced w/kit 35-1567T91 which incl. a 90-1825T2 hub and new other hub bearings to replace Refs. 1 &
1шт.
13
1-1359
BREATHER
Vent
1шт.
14
1-1354
ROLLER BEARING,0.375" OD x 1.46"
Bearing, Roller
288шт.
15
1-1403
SHAFT
Axle (22 Cut Splines)
2шт.
90-1820T1
AXLE SHAFT
Shaft, Axle (36 Rolled Splines)
1шт.
16
1-1400
RING
Gear, Ring
2шт.
17
1-1404
STEERING KNUCKLE
Spindle (Early) (5/5" Mt Holes)
2шт.
Superseded - Old P/N MUSTbe used on models prior to S/N break. New P/N will fit models after the S/N break only.
1шт.
2-1521
STEERING KNUCKLE
Spindle (2nd Style) (3/4" Countersunk Mt Holes)
1шт.
Superseded - Old P/N MUSTbe used on models prior to S/N break. New P/N will fit models after the S/N break only.
1шт.
2-1096
STEERING KNUCKLE
Spindle (Latest) (3/4" Mt Holes)
1шт.
A later spindle, 90-3841T2 can be used to replace 2-1096, but if done, a new washer, 90-4378T1 (Ref. 12) which is .10 thick and is made to fit the deeper groove on 90-3841T2, must be ordered. (These parts are used in S-40 axles in Series IV)
1шт.
Superseded - Old P/N MUSTbe used on models prior to S/N break. New P/N will fit models after the S/N break only.
1шт.
18
1-1405
Housing (Early) 5-8" Spindle Mt Holes)
1шт.
Superseded - Old P/N MUSTbe used on models prior to S/N break. New P/N will fit models after the S/N break only.
1шт.
2-1098
Housing (Later) (3/4" Spindle Mt Holes)
1шт.
Superseded - Old P/N MUSTbe used on models prior to S/N break. New P/N will fit models after the S/N break only.
1шт.
19
1-1406
CARRIER
Planet
2шт.
20
1-1402
RING
Hub, Ring Gear
2шт.
21
1-1401
HUB
Wheel (Early)
2шт.
Superseded - Old P/N CAN be used on all models prior to S/N break only. New P/N MUST be used after S/N break. Order new P/N when old stock is depleted as it will work for all.
1шт.
2-1097
HUB
Wheel (Late)
1шт.
The 2-1097 hub (Ref. 21) may no longer be available. If so it can be serviced with Kit P/N 35-1567T91 which includes a 90-1825T2 hub and new other hub bearings to replace Ref. 1 and 2. These are a 16-755 cone and 16-1206 cup. For identification purposes, the 16-1206 cup has a 7-3/4" OD while the standard 01-1358 has a 7-1/2" OD. This repair would not have occurred until after Jan. '84.
1шт.
Superseded - Old P/N CAN be used on all models prior to S/N break only. New P/N MUST be used after S/N break. Order new P/N when old stock is depleted as it will work for all.
1шт.
22
1-1399
PINION
Gear, Planet
6шт.
23
1-1353
PIN
Planet gear
6шт.
24
1-1398
OIL SEAL
Snap Ring
6шт.
25
1-1350
PLUG
Expansion
6шт.
26
1-3093
LARGE PLATE
Plate, Thrust
12шт.
27
1-1396
SPACER
6шт.
28
1-1395
O-RING,3.484" ID x 3.762" OD x 0.139"
4шт.
29
454862
BOLT,Hex, 5/16" - 18 x 3/4", Gr 8
Capscrew
12шт.
30
271562
SHIELD,Hex, 5/8" - 11 x 2", Gr 5
Capscrew
64шт.
31
19-840
BOLT,1/2" - 13 x 2 1/2", Gr 5
Capscrew (use w/01-1405 Housing)
24шт.
19-1920
SCREW,Flg, 3/4" - 10 x 2 1/4", Gr 8
Capscrew Socket Hd (use w/02-1098 Housing)
1шт.
32
31-531
PLUG
4шт.
33
1-1352
RING
Pilot
2шт.
34
16-1324
DIFFERENTIAL
Diff Assy, Front (Early 19120, ID #94582)
1шт.
90-1844T91
Diff Assy, Front (23120, ID #99999)
1шт.
1-5497
Diff Assy, Front (Late 19120, ID #106455)
1шт.
90-1877T91
Diff Assy, Front (23120, ID #115049) (w/Rolled Spline Side Gears)
1шт.
1-1325
ARRESTER
Diff Assy, Rear (Early 19120, ID #85857)
1шт.
90-1843T91
NO LONGER SERVICED
Diff Assy, Rear (23120, ID #98545)
1шт.
1-5495
Diff Assy, Rear (Late 19120, ID #106453)
1шт.
90-1878T91
DIFFERENTIAL ASSY
Diff Assy, Rear (23120, ID #107942) (w/Rolled Spline Side Gears)
1шт.
35
19-817
SCREW,Hex, 5/8"-11 x 2", G8
Capscrew
8шт.
19-840
BOLT,1/2" - 13 x 2 1/2", Gr 5
Capscrew
4шт.
36
19-2974
BOLT,Hex, 7/8" - 9 x 2 1/4", Gr 8
Lug Bolt
20шт.
223470
BOLT,Hex, 7/8" - 9 x 2 1/2", Gr 8
Lug Bolt (use when wheel has 3/4" thick disc)
1шт.
19-2975
WASHER
(used w/Lug Bolt)
20шт.
37
1-5513
FORK
Yoke
1шт.
38
19-815
BOLT,Hex, 1" - 8 x 9 1/4", Gr 8
Axle Mt Bolt
8шт.
39
19-859
LOCK NUT
Axle mt
8шт.
40
16-46
SCREW
Gasket, Carrier (or can use gasket sealant)
1шт.
Выбрано товаров: 87