Запчасти Case IH PTA325 (10-14) - ELECTRONIC CONTROLLER WITH DESTROKE Options & Miscellaneous

1-6609

ELECTRONIC CONTROLLER ASSEMBLY (PT 225, PT 250 & PT 270) (used w/pump 01-3448 only) consists of ref. nos. 1-25

1шт.

2-6779T91

VALVE, CONTROL

ELECTRONIC CONTROLLER ASSY (PT 225, PT 250 & PT 270) (used w/pump 50-1294T91 only)consists of ref. nos. 1-25

1шт.

1-6375

ELECTRONIC CONTROLLER ASSEMBLY (PTA 296, PTA 297 & PT 350) (used w/pump 01-3449 only)consists of ref. nos. 1-25

1шт.

2-6784T91

VALVE, CONTROL

ELECTRONIC CONTROLLER ASSEMBLY (PTA 296, PTA 297 & PT 350) (used w/pump 50-1293T91 only)consists of ref. nos. 1-25

1шт.

1

1-6303

CARTRIDGE (includes ref. 2) (used w/electronic controller assy's 01-6609 & 01-6303)

3шт.

2-7032T1

CARTRIDGE (includes ref. 2) (used w/electronic controller assy's 02-6779T91 & 02-6784R91)

1шт.

2

31-1335

O-RING,8-1, 90 Duro, .644" ID x .087" Thk

5шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

3

1-6438

HOUSING

1шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

4

1-6439

SOLENOID COIL

1шт.

5

1-6440

CONTROL SPOOL PLUG (includes ref. 2)

2шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

6

1-6459

CONTROL SPOOL SPRING

2шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

7

1-6460

SPACER

2шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

8

1-6461

CONTROL SPOOL

1шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

9

1-6462

CONTROL SHAFT (includes ref. 10 & 11)

1шт.

10

1-6463

O-RING

1шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

11

1-6464

O-RING

2шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

12

1-6465

O-RING

1шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

13

19-297

LOCK WASHER,#10

#10

2шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

14

19-699

WASHER,3/16"

1/4

5шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

15

191209

SCREW,#10 - 24 x 3/8"

CAPSCREW, #10 x 3/8 UNC

2шт.

16

147116

HEX SOC SCREW,#10 - 24 x 1 3/4"

CAPSCREW, #10 x 1-3/4 UNC

3шт.

17

1-6466

CONTROL MODULE

1шт.

18

19-5512

CAPSCREW, #10 x 5/8 UNC

1шт.

19

1-7054

CONTROL LEVER (PT 225, PT 250 & PT 270)

1шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

1-6467

CONTROL LEVER (PTA 296, PTA 297 & PT 350)

1шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

20

19-5519

SET SCREW

1шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

21

1-6468

SPRING, centering spool

1шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

22

1-6469

CENTERING SPOOL

1шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

23

1-6470

GASKET

1шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

24

1-6471

DESTROKE BLOCK

1шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.

25

19-718

BOLT,Hex, 1/4" - 20 x 1 3/4", Gr 5

CAPSCREW, 1/4 x 1-3/4 UNC

2шт.

Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.

1шт.

P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.

1шт.