Запчасти Case IH PTA297 (06-08) - DRAWBAR & MOUNTING (12) - FRAME

1-4080

DRAWBAR

ASSEMBLY, consists of 1-10

1шт.

These two bushings (p/n 01-4067 & p/n 01-7575) are not interchangeable. Drawbar p/n 70-1858T1 can be identified by the square end (shown above) whereas drawbar p/n 01-3960 has a rounded end. NOTE: Ref. 16-26, 29 & 30 are the same for both the early and later style drawbars. NOTE: Later style will replace early style if all items, ref 31-38, are purchased. D: Superseded - Old p/n must be used on models prior to s/n break. New p/n will fit models after the s/n break only.

1шт.

70-1857T91

DRAWBAR

ASSEMBLY (early style)

1шт.

These two bushings (p/n 01-4067 & p/n 01-7575) are not interchangeable. Drawbar p/n 70-1858T1 can be identified by the square end (shown above) whereas drawbar p/n 01-3960 has a rounded end. NOTE: Ref. 16-26, 29 & 30 are the same for both the early and later style drawbars. NOTE: Later style will replace early style if all items, ref 31-38, are purchased. D: Superseded - Old p/n must be used on models prior to s/n break. New p/n will fit models after the s/n break only.

1шт.

1

15-45

SPHERICAL BEARING,1.755" ID x 3.5617" OD x 4"

UNIBALL

1шт.

2

2-10

RETAINER

ring

1шт.

3

19-17

BOLT,Hex, 3/8" - 16 x 1", Gr 5, Full Thd

CAPSCREW, 3/8 x 1 UNC

6шт.

4

1-3976

CLEVIS, drawbar

1шт.

These two bushings (p/n 01-4067 & p/n 01-7575) are not interchangeable. Drawbar p/n 70-1858T1 can be identified by the square end (shown above) whereas drawbar p/n 01-3960 has a rounded end. NOTE: Ref. 16-26, 29 & 30 are the same for both the early and later style drawbars. NOTE: Later style will replace early style if all items, ref 31-38, are purchased. D: Superseded - Old p/n must be used on models prior to s/n break. New p/n will fit models after the s/n break only.

1шт.

70-1859T1

ANCHOR

CLEVIS, drawbar (early style)

1шт.

These two bushings (p/n 01-4067 & p/n 01-7575) are not interchangeable. Drawbar p/n 70-1858T1 can be identified by the square end (shown above) whereas drawbar p/n 01-3960 has a rounded end. NOTE: Ref. 16-26, 29 & 30 are the same for both the early and later style drawbars. NOTE: Later style will replace early style if all items, ref 31-38, are purchased. D: Superseded - Old p/n must be used on models prior to s/n break. New p/n will fit models after the s/n break only.

1шт.

5

19-5389

BOLT,Hex, 1 1/2" - 6 x 5.22", Gr 8

CAPSCREW, 1-1/2 x 5 UNC (qt. 3 on later style)

2шт.

6

19-114

WASHER,1 1/2"

1-1/2 (qty. 3 on later style)

2шт.

7

19-784

NUT,1 1/2"-6, G5

1-1/2 UNC (qty. 3 on later style)

2шт.

8

1-4067

BUSHING

(solid type)

2шт.

1-7575

BUSHING

(split type)

1шт.

Ref. 16-26, 29 & 30 are the same for both the early and later style drawbars.

1шт.

9

1-3960

DRAWBAR

1шт.

These two bushings (p/n 01-4067 & p/n 01-7575) are not interchangeable. Drawbar p/n 70-1858T1 can be identified by the square end (shown above) whereas drawbar p/n 01-3960 has a rounded end. NOTE: Ref. 16-26, 29 & 30 are the same for both the early and later style drawbars. NOTE: Later style will replace early style if all items, ref 31-38, are purchased. D: Superseded - Old p/n must be used on models prior to s/n break. New p/n will fit models after the s/n break only.

1шт.

THE BAR IS 1 1/2 THICK 6" WIDE.

1шт.

70-1858T1

NO LONGER SERVICED

DRAWBAR

1шт.

These two bushings (p/n 01-4067 & p/n 01-7575) are not interchangeable. Drawbar p/n 70-1858T1 can be identified by the square end (shown above) whereas drawbar p/n 01-3960 has a rounded end. NOTE: Ref. 16-26, 29 & 30 are the same for both the early and later style drawbars. NOTE: Later style will replace early style if all items, ref 31-38, are purchased. D: Superseded - Old p/n must be used on models prior to s/n break. New p/n will fit models after the s/n break only.

1шт.

THE BAR IS 1 1/2 THICK 6" WIDE.

1шт.

10

31-93

FITTING

ZERK

1шт.

11

1-4089

SPACER

1шт.

12

1-4088

WASHER,45mm ID x 69.9mm OD x 6.35mm Thk

2шт.

13

1-4087

PIN

KING PIN

1шт.

14

2-17

NUT

king pin

1шт.

15

483-1256

SET SCREW,Hex Soc, 1/4"-20 x 3/8"

1/4 x 3/8 UNC

1шт.

16

1-4284

HANGER

drawbar

1шт.

17

19-216

BOLT,Hex, 3/4" - 10 x 3", Gr 5

CAPSCREW, 3/4 x 3 UNC (without 3-pt. hitch)

4шт.

19-767

BOLT,Hex, 3/4" - 10 x 2 3/4", Gr 5

CAPSCREW, 3/4 x 2-3/4 UNC (with 3-pt. hitch)

1шт.

18

19-85

LOCK NUT

LOCK NUT, 3/4 UNC

4шт.

19

1-4290

HANGER

ROLLER HANGER

1шт.

20

1-4288

PIN

roller

2шт.

21

1-4285

ROLLER

2шт.

22

19-5682

SCREW,Hex Flg, 1/2" - 13 x 1 1/2", Gr 8

CAPSCREW, 1/2 x 1-1/2 UNC

1шт.

23

19-109

WASHER,1/2"

1/2 (early models only)

1шт.

24

1-4918

STOP

pin

2шт.

25

19-16

BOLT,Hex, 3/8" - 16 x 3/4", Gr 5

CAPSCREW, 3/8 x 3/4 UNC

2шт.

26

19-107

WASHER

3/8

2шт.

27

43-49

PIN

PULLPIN, drawbar

1шт.

28

19-1041

LOCK PIN,7/16" x 2"

KLICK PIN

1шт.

29

19-112

WASHER,3/4"

3/4

4шт.

30

80710

LUBE NIPPLE,1/8” – 27 Dryseal PTF

NIPPLE, LUBE, 1/8"-27 x .66 lg

2шт.

31

70-1789T1

DRAWBAR

(later style)

1шт.

These two bushings (p/n 01-4067 & p/n 01-7575) are not interchangeable. Drawbar p/n 70-1858T1 can be identified by the square end (shown above) whereas drawbar p/n 01-3960 has a rounded end. NOTE: Ref. 16-26, 29 & 30 are the same for both the early and later style drawbars. NOTE: Later style will replace early style if all items, ref 31-38, are purchased. D: Superseded - Old p/n must be used on models prior to s/n break. New p/n will fit models after the s/n break only.

1шт.

32

70-1788T1

ANCHOR

CLEVIS, drawbar

1шт.

These two bushings (p/n 01-4067 & p/n 01-7575) are not interchangeable. Drawbar p/n 70-1858T1 can be identified by the square end (shown above) whereas drawbar p/n 01-3960 has a rounded end. NOTE: Ref. 16-26, 29 & 30 are the same for both the early and later style drawbars. NOTE: Later style will replace early style if all items, ref 31-38, are purchased. D: Superseded - Old p/n must be used on models prior to s/n break. New p/n will fit models after the s/n break only.

1шт.

THE BAR IS 2" THICK 5" WIDE

1шт.

33

1-4896

PIN

PULLPIN, drawbar

1шт.

34

42-102

CLEVIS PIN,1/2" x 2.060"

1шт.

35

19-168

COTTER PIN,1/8" x 1"

1шт.

36

1-4908

LATCH

PIVOT, latch

1шт.

37

1-4906

LATCH

1шт.

38

19-59

BOLT,Hex, 5/8" - 11 x 1 1/2", Gr 5

CAPSCREW, 5/8 x 1-1/2 UNC

2шт.