№
Артикул
Название
Примечание
Количество
1-6609
ELECTRONIC CONTROLLER ASSEMBLY (PT 225, PT 250 & PT 270) (used w/pump 01-3448 only) consists of ref. nos. 1-25
1шт.
2-6779T91
VALVE, CONTROL
ELECTRONIC CONTROLLER ASSY (PT 225, PT 250 & PT 270) (used w/pump 50-1294T91 only)consists of ref. nos. 1-25
1шт.
1-6375
ELECTRONIC CONTROLLER ASSEMBLY (PTA 296, PTA 297 & PT 350) (used w/pump 01-3449 only)consists of ref. nos. 1-25
1шт.
2-6784T91
VALVE, CONTROL
ELECTRONIC CONTROLLER ASSEMBLY (PTA 296, PTA 297 & PT 350) (used w/pump 50-1293T91 only)consists of ref. nos. 1-25
1шт.
1
1-6303
CARTRIDGE (includes ref. 2) (used w/electronic controller assy's 01-6609 & 01-6303)
3шт.
2-7032T1
CARTRIDGE (includes ref. 2) (used w/electronic controller assy's 02-6779T91 & 02-6784R91)
1шт.
2
31-1335
O-RING,8-1, 90 Duro, .644" ID x .087" Thk
5шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
3
1-6438
HOUSING
1шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
4
1-6439
SOLENOID COIL
1шт.
5
1-6440
CONTROL SPOOL PLUG (includes ref. 2)
2шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
6
1-6459
CONTROL SPOOL SPRING
2шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
8
1-6461
CONTROL SPOOL
1шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
9
1-6462
CONTROL SHAFT (includes ref. 10 & 11)
1шт.
10
1-6463
O-RING
1шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
11
1-6464
O-RING
2шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
12
1-6465
O-RING
1шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
13
19-297
LOCK WASHER,#10
#10
2шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
14
19-699
WASHER,3/16"
1/4
5шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
15
191209
SCREW,#10 - 24 x 3/8"
CAPSCREW, #10 x 3/8 UNC
2шт.
16
147116
HEX SOC SCREW,#10 - 24 x 1 3/4"
CAPSCREW, #10 x 1-3/4 UNC
3шт.
17
1-6466
CONTROL MODULE
1шт.
18
19-5512
CAPSCREW, #10 x 5/8 UNC
1шт.
19
1-7054
CONTROL LEVER (PT 225, PT 250 & PT 270)
1шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
1-6467
CONTROL LEVER (PTA 296, PTA 297 & PT 350)
1шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
20
19-5519
SET SCREW
1шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
21
1-6468
SPRING, centering spool
1шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
22
1-6469
CENTERING SPOOL
1шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
24
1-6471
DESTROKE BLOCK
1шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
25
19-718
BOLT,Hex, 1/4" - 20 x 1 3/4", Gr 5
CAPSCREW, 1/4 x 1-3/4 UNC
2шт.
Hardware kit P/N 02-2363 includes ref. 13-16 & 25 on this figure and ref. 1 & 2 on figure 10-13. Seal overhaul kits include ref. 2, 10, 11, 12 & 23 on this figure (see the "Note" on figure 10-25 for more details). Control sub-assembly kits P/N 02-2366 (PTA 296, PTA 297 & PTO 350) and P/N 02-2367 (PT 225, PT 250 & PT 270) include ref. 3, 5-9 & 18-25 on this figure and ref. 4 on figure 10-13.
1шт.
P/N 02-1099 is a special EHC orifice with a .014 diameter hole instead of the standard .040 hole.
1шт.
Выбрано товаров: 69