Запчасти Case IH KM-325 (04-41) - TRANSFER CASE ASSEMBLY (04) - Drive Train

90-2775T94

BOX

Transfer Case Assy., Replaces 90-2775T93, BSN 4150, also Includes Refs. 1-22, 25 and 32 on preceding Figure, consists of Ref. 1 - 68, Serial Range: -4150

1шт.

Superseded, old P/N can be used up on all models prior to S/N break only. New P/N MUST be used after S/N break. Order new P/N when old stock is depleted as it will work for all.

1шт.

90-5803T91

BOX

Transfer Case Assy., ASN 4150, Includes Refs. 12, 17, 20 and 32-38 on preceding Figure, Start Serial: 4150

1шт.

Superseded, Old P/N can be used for all models, but order new P/N when stock is depleted.

1шт.

1

90-4321T1

GEARBOX ASSY

Transfer Case Housing, used with early shifter on preceding Figure, but will service 90-5805T1

1шт.

Superseded, Old P/N can be used for all models, but order new P/N when stock is depleted.

1шт.

90-5805T1

GEARBOX ASSY

Transfer Case Housing, used with later shifter on preceding Figure only

1шт.

Superseded, old P/N must be used on models prior to S/N break. New P/N will fit models after the S/N break only.

1шт.

2

1-2255

BEARING, CUP,4.8125" OD x 1.5"

Bearing Cup

5шт.

3

1-2256

ROLLER BEARING,2.5" ID x 1.51"

Bearing Cone

5шт.

4

14-153

SEAL

3шт.

5

90-3488T1

ANCHOR

End Cap, shown above

1шт.

Superseded, old P/N can be used up on all models prior to S/N break only. New P/N MUST be used after S/N break. Order new P/N when old stock is depleted as it will work for all.

1шт.

90-3540T1

ANCHOR

Brake Mount

1шт.

ASN 3350 this end cap has been replaced by Brake Mount P/N 90-3540T1 which is simply a single piece version of the end cap and Plate P/N 90-2786T1 (see Ref. 15 on page 5-1). The new mt will service the older but capscrews P/N 9430876 in Ref. 11 are needed.

1шт.

Superseded, old P/N can be used up on all models prior to S/N break only. New P/N MUST be used after S/N break. Order new P/N when old stock is depleted as it will work for all.

1шт.

6

1-2273

ROLLER BEARING,3" ID x 1.5"

Needle Bearing

4шт.

7

1-2274

SPACER

Bearing Spacer

2шт.

8

19-44

BOLT,Hex, 1/2" - 13 x 1 1/4", Gr 5

Capscrew

37шт.

9

19-45

BOLT,1/2" - 13 x 1 1/2", Gr 5

Capscrew (w/early Ref. 50 only)

14шт.

19-43

BOLT,1/2" - 13 x 1", Gr 5

Capscrew (w/later Ref. 50 only)

1шт.

10

1-2285

SPACER

Gear Spacer

2шт.

11

19-6006

BOLT,Hex, 5/8" - 11 x 3 3/4", Gr 8

Flanged Capscrew (used with End Cap P/N 90-3488T1)

12шт.

9430876

BOLT,5/8" - 11 x 2 1/2", Gr 8

Capscrew (used with Brake Mount P/N 90-3540T1)

1шт.

12

31-635

NIPPLE, LUBE

Pipe Nipple

1шт.

13

31-303

BREATHER

1шт.

14

32-310

CLAMP

1шт.

15

19-107

WASHER

(w/early Ref. 50 only)

4шт.

16

31-599

ELBOW

1шт.

17

1-2268

GEAR

(51T), BSN 4150, Serial Range: -4150

1шт.

1-7176T1

Gear (44T), ASN 4150, Start Serial: 4150

1шт.

18

1-3364

BEARING, CUP,5.3457" OD x 1.752"

Bearing Cup

1шт.

19

1-3365

ROLLER BEARING,2.5005" ID x 2.207"

Bearing Cone

1шт.

20

1-2262

PLUG

End Cap

2шт.

21

1-2264

CAP

End Cap

1шт.

22

1-9070

CYLINDER END CAP

End Cap

1шт.

23

90-1841T1

CYLINDER END CAP

End Cap

1шт.

24

90-1865T1

SHAFT

Output Shaft

1шт.

25

1-2291

GEAR

(50T), BSN 4150, Serial Range: -4150

1шт.

1-7174T1

GEAR

(45T), ASN 4150, Start Serial: 4150

1шт.

26

90-1817T1

SHAFT

Middle Shaft

1шт.

27

1-2282

GEAR

(47T), BSN 4150, Serial Range: -4150

1шт.

1-7175T1

Gear (42T), ASN 4150, Start Serial: 4150

1шт.

28

1-2307

SHAFT

Input Shaft

1шт.

29

1-2316

PINION

Gear (54T), BSN 4150, Serial Range: -4150

1шт.

1-7172T1

Gear (47T), ASN 4150, Start Serial: 4150

1шт.

30

1-2310

GEAR

(51T), BSN 4150, Serial Range: -4150

1шт.

1-7173T1

GEAR

(44T), ASN 4150, Start Serial: 4150

1шт.

31

1-2258

CLUTCH

BSN 4150, Serial Range: -4150

1шт.

90-2216T1

CLUTCH

ASN 4150, Start Serial: 4150

1шт.

32

1-3355

GASKET

(qty 2 on early models)

1шт.

33

1-3358T1

SHIM

(.005)

1шт.

1-3359T1

SHIM

(.007)

1шт.

1-3360T1

SHIM

(.020)

1шт.

34

1-2296

SHIM

(.005)

2шт.

1-2297

SHIM

(.007)

2шт.

1-2298

SHIM

(.020)

2шт.

35

1-3363

O-RING,5.984" ID x 6.262" OD x 0.139"

1шт.

36

1-2270

O-RING,9.234" ID x 9.512" OD x 0.139"

O-Ring

1шт.

37

90-4152T1

LARGE PLATE

Top Plate

1шт.

38

1-2271

SEAL

O-Ring

4шт.

39

1-2269

O-RING,2.237" ID x 2.443" OD x 0.103"

1шт.

40

1-2550

FORK

Shifter Fork

1шт.

41

31-474

ELBOW,90 Degree, 3/4"-16, 37 Degree x 1/4"-18, NPTF

2шт.

42

1-2546

PIPE

Nipple

2шт.

43

1-6271

TUBE

1шт.

44

90-2665T1

TUBE,.25" OD

1шт.

45

1-2290

WASHER

2шт.

46

19-477

BOLT,Hex, 1/2" - 20 x 2", Gr 8

Capscrew

1шт.

47

31-90

PLUG

Expansion Plug

1шт.

48

19-17

BOLT,Hex, 3/8" - 16 x 1", Gr 5, Full Thd

Capscrew

4шт.

49

1-8616

TUBE,0.5" OD, 795, 263 mm Length

1шт.

50

1-8616

TUBE,0.5" OD, 795, 263 mm Length

Oil Sump, shown above, Serial Range: -4150

1шт.

Superseded, Old P/N can be used for all models, but order new P/N when stock is depleted.

1шт.

90-3967T1

SUMP

Oil Sump, later style, BSN 4150

1шт.

The oil sump, Ref 50, changed from cast to steel, ASN 3276 (10-31-83). New will repl old but order correct mt bolts Ref.9

1шт.

Superseded, Old P/N can be used for all models, but order new P/N when stock is depleted.

1шт.

51

31-1054

PLUG

Magnetic Plug

1шт.

52

1-3683

DIPSTICK

1шт.

53

144069

GUIDE

1шт.

54

1-3777

SCREEN

(w/early Ref. 50 only)

1шт.

55

19-5394

Capscrew (w/early Ref. 50 only)

4шт.

56

1-3799

TUBE

Fill Tube

1шт.

57

1-3810

GASKET

1шт.

58

31-1255

Caplug

8шт.

59

31-492

TEE,37 Degree, 3/4"-16 x 3/4"-16, Fem Sw Br

1шт.

60

31-336

PLUG

(8) (early models only)

1шт.

61

1-2209

FORK

Yoke

1шт.

62

14-59T1

NUT

Replaces 14-59

2шт.

63

19-163

WASHER,1 1/4" x 2 3/4" x 0.164"

1шт.

64

90-1816T1

YOKE

Brake Yoke

1шт.

65

19-5796

WASHER

1шт.

66

1-6992

FORK

Yoke

1шт.

67

90-1869T1

O-RING,2.487" ID x 2.693" OD x 0.103"

1шт.

68

19-43

BOLT,1/2" - 13 x 1", Gr 5

Capscrew

14шт.