Запчасти Case IH CP-1325 (10-01) - 3-POINT HITCH AND MOUNTING Options & Miscellaneous

1

ROCKERSHAFT (see figure 10-5)

1шт.

2

2-3645T1

PIN

2шт.

3

2-3646T1

PIN

3шт.

4

2-2516T2

LARGE PLATE

PLATE

2шт.

5

19-792

BOLT,Hex, 1/2" - 13 x 2 1/2", Gr 8

CAPSCREW

4шт.

6

2-3653T1

PLATE

SWAY BLOCK (left)

1шт.

7

2-3654T1

PLATE

SWAT BLOCK (right)

1шт.

8

19-701

WASHER,1 1/4"

4шт.

9

19-111

WASHER,5/8"

4шт.

10

19-674

BOLT,Hex, 5/8" - 11 x 3/4", Gr 5

CAPSCREW

4шт.

11

70-2059T1

PIN

2шт.

12

19-543

BOLT,Hex, 1/2" - 13 x 1 1/2", Gr 8

CAPSCREW

4шт.

13

19-1058

WASHER

8шт.

14

2-3659T1

SUPPORT

NON-SWAY BLOCK (right)

1шт.

15

454899

BOLT,Hex, 3/8" - 16 x 7/8", Gr 8, Full Thd

CAPSCREW (3/8")

14шт.

See figure 8-7 for 3-pt hitch hydraulics information. See figure 10-6 for quick hitch information. The mounting plate (ref. 27) change will be a code C supression; however, the 1/2" mounting refs. will also be needed. The 3/8" mounting refs. will still be used on early models. 3-pt hitch kits: 35-1466T91 - Cat IV with PTO 35-1467T94 - Cat IV w/o PTO 35-1498T91 - Cat IV N with PTO 35-1469T91 - Cat IV N w/o PTO (C) - Superseded - old P/N can be used up on all models prior to S/N break only. New P/N must be us

1шт.

Superseded - old P/N must be used on models prior to S/N break. New P/N will fit models after the S/N break only.

1шт.

19-1108

BOLT,Hex, 1/2" - 13 x 1", Gr 8

CAPSCREW (1/2")

14шт.

Superseded - old P/N can be used up on all models prior to S/N break only. New P/N must be used after S/N break. Order new P/N when old stock is depleted as it will work for all.

1шт.

See figure 8-7 for 3-pt hitch hydraulics information. See figure 10-6 for quick hitch information. The mounting plate (ref. 27) change will be a code C supression; however, the 1/2" mounting refs. will also be needed. The 3/8" mounting refs. will still be used on early models. 3-pt hitch kits: 35-1466T91 - Cat IV with PTO 35-1467T94 - Cat IV w/o PTO 35-1498T91 - Cat IV N with PTO 35-1469T91 - Cat IV N w/o PTO (C) - Superseded - old P/N can be used up on all models prior to S/N break only. New P/N must be us

1шт.

16

2-3590T2

LOWER LINK

(Cat IV)

2шт.

70-1923T2

ROCKER ARM

LOWER LINK (Cat IV N)

2шт.

17

LIFT LINK (see page 10-4)

2шт.

18

UPPER LINK (see page 10-4)

1шт.

19

CLEVIS LOCKING BLOCK (see figure 10-5)

2шт.

20

2-4110T1

GUARD

1шт.

21

19-76

NUT,1/4"-20, G5

2шт.

22

19-223

WASHER,1/4"

2шт.

23

19-224

WASHER,3/8", SAE

2шт.

24

19-6071

GROOVED PIN,1/8" x 1 1/4", Type D

Pin, Grooved, 1/8" x 1 1/4", Type D

1шт.

25

31-1740

GROMMET

1шт.

26

POSITION CONTROL (see figure 10-5)

1шт.

27

70-1591T3

LARGE PLATE

MOUNTING PLATE (3/8" holes)

1шт.

Superseded - old P/N can be used up on models prior to S/N break. New P/N must be used after the S/N break. Order new P/N when old stock is depleted as it will work for all.

1шт.

See figure 8-7 for 3-pt hitch hydraulics information. See figure 10-6 for quick hitch information. The mounting plate (ref. 27) change will be a code C supression; however, the 1/2" mounting refs. will also be needed. The 3/8" mounting refs. will still be used on early models. 3-pt hitch kits: 35-1466T91 - Cat IV with PTO 35-1467T94 - Cat IV w/o PTO 35-1498T91 - Cat IV N with PTO 35-1469T91 - Cat IV N w/o PTO (C) - Superseded - old P/N can be used up on all models prior to S/N break only. New P/N must be us

1шт.

70-1591T4

LARGE PLATE

MOUNTING PLATE (1/2" holes)

1шт.

See figure 8-7 for 3-pt hitch hydraulics information. See figure 10-6 for quick hitch information. The mounting plate (ref. 27) change will be a code C supression; however, the 1/2" mounting refs. will also be needed. The 3/8" mounting refs. will still be used on early models. 3-pt hitch kits: 35-1466T91 - Cat IV with PTO 35-1467T94 - Cat IV w/o PTO 35-1498T91 - Cat IV N with PTO 35-1469T91 - Cat IV N w/o PTO (C) - Superseded - old P/N can be used up on all models prior to S/N break only. New P/N must be us

1шт.

Superseded - old P/N can be used up on models prior to S/N break only. New P/N must be used after the S/N break. Order new P/N when old stock is depleted as it will work for all.

1шт.

28

19-5685

WASHER

22шт.

29

19-5739

WASHER

6шт.

30

223489

BOLT,Hex, 1" - 8 x 3 1/2", Gr 8

CAPSCREW

6шт.

31

223495

BOLT,1" - 8 x 5", Gr 8

CAPSCREW

8шт.

32

429-1016

NUT,1"-8, G8

14шт.

33

70-2318T1

RETAINER BLOCK (3/8" holes)

7шт.

See figure 8-7 for 3-pt hitch hydraulics information. See figure 10-6 for quick hitch information. The mounting plate (ref. 27) change will be a code C supression; however, the 1/2" mounting refs. will also be needed. The 3/8" mounting refs. will still be used on early models. 3-pt hitch kits: 35-1466T91 - Cat IV with PTO 35-1467T94 - Cat IV w/o PTO 35-1498T91 - Cat IV N with PTO 35-1469T91 - Cat IV N w/o PTO (C) - Superseded - old P/N can be used up on all models prior to S/N break only. New P/N must be us

1шт.

70-3082T1

BLOCK

RETAINER BLOCK (1/2" holes)

7шт.

See figure 8-7 for 3-pt hitch hydraulics information. See figure 10-6 for quick hitch information. The mounting plate (ref. 27) change will be a code C supression; however, the 1/2" mounting refs. will also be needed. The 3/8" mounting refs. will still be used on early models. 3-pt hitch kits: 35-1466T91 - Cat IV with PTO 35-1467T94 - Cat IV w/o PTO 35-1498T91 - Cat IV N with PTO 35-1469T91 - Cat IV N w/o PTO (C) - Superseded - old P/N can be used up on all models prior to S/N break only. New P/N must be us

1шт.

34

19-5877

BOLT,Hex, 3/8" - 16 x 1", Gr 5

CAPSCREW

4шт.

35

70-2433T1

PIN

2шт.

36

70-2384T1

PIN

2шт.

37

70-1574T1

PIN

2шт.

38

2-4836T1

SPACER

4шт.

39

2-3655T1

PLATE

NON-SWAY BLOCK (left)

1шт.

40

70-2132T1

MOUNTING PARTS

UPPER LINK MOUNT (w/o PTO)

1шт.

41

223470

BOLT,Hex, 7/8" - 9 x 2 1/2", Gr 8

CAPSCREW

6шт.

42

19-853

WASHER,15/16" x 1 3/4" x .134", HDN

6шт.

43

70-1633T1

PIN

1шт.

44

70-2186T1

SPACER

2шт.

45

2-2438T2

BLOCK

RETAINER BLOCK

1шт.

46

HYDRAULIC CYLINDER (see figure 10-3)

2шт.

47

454899

BOLT,Hex, 3/8" - 16 x 7/8", Gr 8, Full Thd

CAPSCREW

2шт.