Запчасти Case IH 885 (6-30) - FINAL DRIVE (06) - POWER TRAIN
№
Артикул
Название
Примечание
Количество
1
K943951
GEAR
HOUSING - final drive, left-hand, used with 885N tractors, no longer available
1шт.
K943952
GEAR
HOUSING - final drive, right-hand, used with 885N tractors, no longer available
1шт.
7
238-5224
O-RING,0.139" Thk x 1.734" ID, -224, Cl 5, 75 Duro
(Replaces O-ring K15533) -224, 70 Duro, 1.734" ID x .139" Thk
2шт.
11
O-RING,0.139" Thk x 2.984" ID, -234, Cl 5, 75 Duro
(Replaces O-ring K623545) -234, 70 Duro, 2.984" ID x .139" Thk
2шт.
14
K963569
SHAFT ASSY.
SHAFT ASSEMBLY - final drum, with ring nut and collar, Includes: Ref. 15 - 17
2шт.
22
K19186
BEARING, ROLLER
BEARING - tapered roller, no longer available, order bearing ST2118 and seal B17220, Ref. 37 and 38
2шт.
23
K623452
SEAL,90mm ID x 110.28mm OD x 11.99mm Thk
- oil, 90 x 110 x 12 mm, inner
2шт.
24
K15550
OIL SEAL,80.95mm ID x 108.08mm OD x 15.88mm Thk
- oil, 3-1/4 x 4-1/4 x 5 inch, outer
2шт.
26
K902773
SHIM,.006" Thk
No longer available, Order shim K902772 above .006" Thk
1шт.
27
K606894
SCREW
BOLT - Wedglock, 7/16 inch NC, oil seal housing to final drive housing, no longer available
12шт.
28
238-5439
O-RING,0.275" Thk x 6.475" ID, -439, Cl 5, 75 Duro
- internal, 6-1/2 inch diameter, oil seal housing to final drive housing (Replaces O-ring K623537)
2шт.
219-8
LUBE NIPPLE,1/4" - 28 NPTF
NIPPLE, LUBE, , straight, taper (Replaces fitting K13176) 1/4"-28 NPT x .54" lg
2шт.
31
413-516
BOLT,Hex, 5/16" - 18 x 1", Gr 5
- hex, 5/16 NC x 1 inch (Replaces bolt K602805)
16шт.
K626317
WASHER
- flat, aluminum, 27/32 inch, housing (Replaces washer K626793)
2шт.
35
413-822
BOLT,Hex, 1/2" - 13 x 1-3/8", Gr 5
- hex, 1/2 NC x 1-3/8 inch, housing to rear axle (Replaces bolt K603107)
20шт.
35
K603144
SCREW
- special, 1/2 NC x 1 inch, housing to rear axle, used with 885N tractors, no longer available (Replaces bolt K603107)
1шт.
80679
LOCK WASHER,1/20.507 CST ZND
WASHER, LOCK, , Housing to rear axle (Replaces washer K19484) 1/2"
20шт.
193-87
LOCK WASHER,Ext-Int Tooth, 1/2"
WASHER, LOCK, , Housing to rear axle, used with 885N tractors (Replaces washer K11518) Ext-Int Tooth, 1/2"
1шт.
36
K11482
PIN
DOWEL - housing to rear axle, 7/16 x 1-1/4 inch, three used with 885N tractors, four used with all other tractors
1шт.
36
K30362
PIN
DOWEL - housing to rear axle, 7/16 x 1 inch, used with 885N tractors
1шт.
37
ST2118
TAPERED BEARING,1.75" ID x 3.27" OD x 0.9375"
BEARING - tapered roller, inner, not shown
2шт.
Выбрано товаров: 0