Заказать запчасти 
Запчасти Case IH 9370 (4-34) - GAUGE PANEL, P.I.N. JEE0071001 AND AFTER (04) - ELECTRICAL SYSTEMS
№
Артикул
Название
Примечание
Количество
1
60-7056T2
COVER
- panel, cab, gauge
1шт.
1
60-6166T1
COVER
- panel, ROPS, gauge, not shown
1шт.
2
19-6136
STUD
- quarter turn, five used on ROPS
6шт.
3
19-5668
WASHER
- flat, 1/4 x 3/4 x 3/16 inch, five used on ROPS
6шт.
4
A36042
CLIP
RETAINER - quarter turn, five used on ROPS
6шт.
5
REF
INSTRUCTION
DECAL - MPH, See Figure 9-120 for decal
1шт.
6
425-117
NUT,7/16"-20, G5
- hex, 7/16 inch NF
1шт.
7
230-14106
LOCK NUT,#6-32, GB
NUT - hex, self-locking, No. 6 NC
4шт.
8
60-5756T1
PANEL
- gauge, if used
1шт.
9
60-5939T3
DECAL
- gauge panel, if used, See Figure 9-116 for decal
1шт.
10
140-101
SCREW,Cross Pan Hd, #6 - 32 x 1/2"
4шт.
11
60-7295T1
PANEL ASSY.
PANEL - gauge, if used
1шт.
12
60-7297T1
DECAL
- gauge panel, if used
1шт.
13
60-7298T1
METER
- area, if equipped
1шт.
19
20-2466T2
VOLTMETER
GAUGE - voltmeter
1шт.
20
20-2464T2
FUEL GAUGE
GAUGE - fuel level
1шт.
21
20-2465T2
GAUGE ASSY.
GAUGE - water temperature, engine
1шт.
22
60-6145T2
OIL PRESSURE GAUGE
GAUGE - oil pressure, engine
1шт.
23
23731R1
BULB,C2F, #1893, 14V
- lamp, No.1893
5шт.
24
60-6292T4
HARNESS
- instrument panel lamp
1шт.
25
9411893
LOCK NUT,#10-32, GB
NUT - hex, self-locking, No. 10 NF
4шт.
26
31-2740
ELBOW
- 90 degree, 1/8 PT x 7/16 inch thread
1шт.
27
31-2784
HOSE
- 1067 mm (42 inch) long, gauges
1шт.
28
60-6330T1
ASSEMBLY
SWITCH - pressure
1шт.
29
218-1557
HYD CONNECTOR,37º, Sw, 7/16"-20 x 1/8"-27 NPTF
ADAPTER - straight, 7/16-20 swivel x 1/8 inch female PT
1шт.
30
218-5478
TEE,7/16" - 20 JIC x 7/16" - 20 JIC x 7/16" - 20 JIC
- 7/16-20 inch flare branch x flare x swivel
1шт.
31
218-671
FITTING,Blkhd, 7/16"-20, 37 Degree x 7/16"-20, 37 Degree
ADAPTER - straight, 7/16-20 inch flare x bulkhead flare
1шт.
32
64-146
PLUG
- hole, access
1шт.
33
31-3024
HOSE
- 2743 mm (108 inch) long, engine oil pressure
1шт.
34
22-824
CABLE TIE,3/16" x 7 1/4"
STRAP - tie, 7 inch
1шт.
35
31-1070
CLAMP,5/8", 3/8" Bolt, Double
- extended P-type
1шт.
37
515-23190
CLAMP,3/4", Insul, 3/8" Bolt
P-type, One used on cab 3/4", Insul, 3/8" Bolt
2шт.
38
425-106
NUT,3/8"-16, Cl 5
1шт.
40
218-5228
ELBOW,90 Degree, 7/16"-20, 37 Degree x 7/16"-20, 37 Degree Fem Sw
- 90 degree, 7/16-20 inch flare x swivel
1шт.
41
218-441
HYD CONNECTOR,7/16" - 20 Male JIC x 1/8" - 27 Male NPTF
ADAPTER - straight, 7/16-20 flare x 1/8 inch PT
1шт.
35-2010T91
PACKAGE, REPAIR
KIT - area meter installation, P.I.N. JEE0072111 and after, includes (1) 60-7298T1 meter, item 13 and (2) 22-824 tie wraps, not shown
1шт.
Machines built prior to P.I.N. JEE0072111 need to order (1) 35-2011T91 kit in order to install area meter. All machines built P.I.N. JEE0072111 and after are area meter ready and can order (1) 35-2010T91 for service. As an additional option to the area meter, the implement status switch kit 35-2012T91 may be used to relay information on the positioning of the implement.
1шт.
35-2011T91
PACKAGE, REPAIR
KIT - area meter installation, prior to P.I.N. JEE0072111
1шт.
Machines built prior to P.I.N. JEE0072111 need to order (1) 35-2011T91 kit in order to install area meter. All machines built P.I.N. JEE0072111 and after are area meter ready and can order (1) 35-2010T91 for service. As an additional option to the area meter, the implement status switch kit 35-2012T91 may be used to relay information on the positioning of the implement.
1шт.
35-2012T91
IGNITION SWITCH
KIT - implement status switch, not shown, includes (1) 221545A1 switch and (2) 221546A1 harness, may be used with area meter
1шт.
Machines built prior to P.I.N. JEE0072111 need to order (1) 35-2011T91 kit in order to install area meter. All machines built P.I.N. JEE0072111 and after are area meter ready and can order (1) 35-2010T91 for service. As an additional option to the area meter, the implement status switch kit 35-2012T91 may be used to relay information on the positioning of the implement.
1шт.
Выбрано товаров: 41