№
Артикул
Название
Примечание
Количество
1
820446C91
ANGLE
ASSEMBLY - beater number 1, includes items 2 and 3
1шт.
1
820447C91
ANGLE
ASSEMBLY - beater number 2, includes items 2 and 3
1шт.
1
820448C91
ANGLE
ASSEMBLY - beater number 3, includes items 2 and 3
1шт.
1
820449C91
ANGLE
ASSEMBLY - beater number 4, includes items 2 and 3
1шт.
2
593073R1
TOOTH
- beater, double
8шт.
3
106916
RIVET,Tr Hd, 5/16" x 1"
- truss head, 5/16 x 1 inch, not shown
14шт.
413-614
BOLT,Hex, 3/8" - 16 x 7/8", Gr 5
Beater angles to shaft brackets Hex, 3/8"-16 x 7/8", G5, Full Thd
12шт.
425-106
NUT,3/8"-16, Cl 5
12шт.
492-11038
LOCK WASHER,3/8"
12шт.
4
820440C1
SHAFT - upper beater
1шт.
495-81205
WASHER,32.54mm ID x 50.8mm OD x 1.7mm Thk
- flat, 1-9/32 x 2 x 3/64 inch
1шт.
432-1640
COTTER PIN,1/4" x 2 1/2"
Pin, Split (Cotter), , in left-hand end of beater shaft 1/4" x 2 1/2"
1шт.
5
820453C1
SUPPORT
- upper beater, left-hand
1шт.
6
820454C1
SUPPORT
- upper beater, right-hand
1шт.
7
820635C1
BAR
- rear, spacer, upper beater
2шт.
434-612
CARRIAGE BOLT,Sht Sq Nk, 3/8" - 16 x 3/4", Gr 5
BOLT - carriage, 3/8 NC x 3/4 inch, (2) used for supports to box main sides, (1) used for support and rear spacer bar to box left-hand rear side
3шт.
425-106
NUT,3/8"-16, Cl 5
3шт.
492-11038
LOCK WASHER,3/8"
3шт.
8
820452C1
PLATE
- right-hand support reinforcement
1шт.
434-620
CARRIAGE BOLT,Sht Sq Nk, 3/8" - 16 x 1 1/4", Gr 5
BOLT, CARRIAGE, Short NK, 3/8"-16 x 1 1/4", G5, Full Thd
4шт.
425-106
NUT,3/8"-16, Cl 5
4шт.
492-11038
LOCK WASHER,3/8"
4шт.
10
557995R11
COLLAR
ASSEMBLY - bearing locking
2шт.
83-1315
SET SCREW,Hex Soc, 5/16"-18 x 5/16"
SCREW - set, headless slotted, 5/16 NC x 5/16 inch, cup point
2шт.
11
565631R1
BEARING CAP,2.441" ID x 4.4375" OD x 0.34375"
RETAINER - bearing
4шт.
12
622535R1
SPACER,1/2" X-Strng Pipe x 7/16"
bearing mounting 1/2" X-Strng Pipe x 7/16"
6шт.
434-620
CARRIAGE BOLT,Sht Sq Nk, 3/8" - 16 x 1 1/4", Gr 5
BOLT, CARRIAGE, Short NK, 3/8"-16 x 1 1/4", G5, Full Thd
3шт.
434-624
CARRIAGE BOLT,Sht Sq Nk, 3/8" - 16 x 1 1/2", Gr 5
BOLT - carriage, 3/8 NC x 1-1/2 inch
3шт.
425-106
NUT,3/8"-16, Cl 5
6шт.
492-11038
LOCK WASHER,3/8"
6шт.
13
821076C2
BEATER
SHAFT - upper beater , MODELS 540 AND 550 - BUILT MAY 1976 AND AFTER MODELS 560 - BUILT 1980 AND AFTER
1шт.
NOTE: Items 13 and 14 replace items 1, 2, 3 and 4 (including hardware) on the models built at the later dates.
1шт.
14
821081C1
PLATE
- upper beater , MODELS 540 AND 550 - BUILT MAY 1976 AND AFTER MODELS 560 - BUILT 1980 AND AFTER
16шт.
NOTE: Items 13 and 14 replace items 1, 2, 3 and 4 (including hardware) on the models built at the later dates.
1шт.
426-616
BOLT,Hex, 3/8" - 16 x 1", Gr 8
Plates to upper beater shaft, Models 540 and 550 - Built May 1976 and after Models 560 - Built 1980 and after Hex, 3/8"-16 x 1", G8, Full Thd
32шт.
NOTE: Items 13 and 14 replace items 1, 2, 3 and 4 (including hardware) on the models built at the later dates.
1шт.
429-106
NUT,3/8"-16, G8
- hex, 3/8 inch NC, grade 8 , MODELS 540 AND 550 - BUILT MAY 1976 AND AFTER MODELS 560 - BUILT 1980 AND AFTER
32шт.
NOTE: Items 13 and 14 replace items 1, 2, 3 and 4 (including hardware) on the models built at the later dates.
1шт.
492-11038
LOCK WASHER,3/8"
MODELS 540 AND 550 - BUILT MAY 1976 AND AFTER MODELS 560 - BUILT 1980 AND AFTER 3/8"
32шт.
NOTE: Items 13 and 14 replace items 1, 2, 3 and 4 (including hardware) on the models built at the later dates.
1шт.
608700R1
WASHER
- flat, 1-9/32 x 2 x 3/64 inch , MODELS 540 AND 550 - BUILT MAY 1976 AND AFTER MODELS 560 - BUILT 1980 AND AFTER
8шт.
NOTE: Items 13 and 14 replace items 1, 2, 3 and 4 (including hardware) on the models built at the later dates.
1шт.
432-1640
COTTER PIN,1/4" x 2 1/2"
Pin, Split (Cotter), , Models 540 and 550 - built May 1976 and after; Models 560 - built 1980 and after 1/4" x 2 1/2"
1шт.
NOTE: Items 13 and 14 replace items 1, 2, 3 and 4 (including hardware) on the models built at the later dates.
1шт.
Выбрано товаров: 45