Запчасти Case IH 540 (9-070) - WIDESPREAD DRIVE AND REAR SHIELD, USED ON ALL MODELS EXCEPT 560 (09) - CHASSIS/ATTACHMENTS
№
Артикул
Название
Примечание
Количество
1
820257C1
SPLINED COUPLING
CLUTCH - widespread drive, sliding, 6 teeth, used on machines built 1972 to June, 1975
1шт.
1
821200C1
CLUTCH
- widespread drive, sliding, 17 teeth, used on machines built June, 1975 and after
1шт.
Ref #1 P/N 8202575C1 6 teeth should be 6 spline. P/N 821200C1 17 teeth should be 17 spline.
1шт.
495-81084
WASHER,1.16" ID x 1.5" OD x 0.06" Thk
- flat, 1-5/32 x 1-1/2 x 5/64 inch
1шт.
86636814
LUBE NIPPLE,1/4"-28 x .52" lg
FITTING - grease, straight, 1/4-28 x 1/2 inch, in sliding clutch
1шт.
126-125
WOODRUFF KEY,#B, 5/16" x 1", HT
Pinion clutch to gearbox input shaft #B, 5/16" x 1", HT
1шт.
138-2029
PIN,7.92mm OD x 63.5mm L, Coiled
Pinion clutch to gearbox input shaft 5/16" x 2 1/2", Coiled
1шт.
19998R1
PIN,1/2" x 2 1/2", Coiled
output shaft to widespread 1/2" x 2 1/2", Coiled
1шт.
413-612
BOLT,Hex, 3/8" - 16 x 3/4", Gr 5
Gearbox to support angles Hex, 3/8"-16 x 3/4", G5, Full Thd
4шт.
434-612
CARRIAGE BOLT,Sht Sq Nk, 3/8" - 16 x 3/4", Gr 5
BOLT - carriage, 3/8 NC x 3/4 inch, drive support angles to left-hand rear side of box
6шт.
413-412
BOLT,Hex, 1/4" - 20 x 3/4", Gr 5
- hex, 1/4 NC x 3/4 inch, Hinge to rear drive support
3шт.
413-413
BOLT - hex, 1/4 NC x 1 inch, hinge to rear drive support and front spring anchor bar
1шт.
495-61041
WASHER,10.31mm ID x 25.4mm OD x 1.6mm Thk
- flat, 7/16 x 1 x 5/64 inch
1шт.
413-612
BOLT,Hex, 3/8" - 16 x 3/4", Gr 5
Mounting bracket to widespread drive support lower angle Hex, 3/8"-16 x 3/4", G5, Full Thd
1шт.
Выбрано товаров: 0