Заказать запчасти 
Запчасти Case IH 1150
- (2) - INTRODUCTION
- (3) - INTRODUCTION
- (4) - INTRODUCTION
- (C-01) - 950 AND 1150 GRINDER-MIXER
- (C-03[A]) - 950 SERIAL NOS. 1913 TO 2590 1150 SERIAL NOS. 5313 TO 7919 950 SERIAL NO. 3992 AND ABOVE 1150 SERIAL NO. 14309 AND ABOVE
- (C-03) - SWIVEL TYPE JACK, 950 SERIAL NO. 1912 AND BELOW, 1150 SERIAL NO. 5312 & BELOW
- (C-04) - SWIVEL TYPE JACK, 950 SERIAL NOS. 2591 TO 3991, 1150 SERIAL NO. 7920 TO 14308
- (C-05) - AXLE AND WHEELS
- (C-06) - MAIN BELT, MIXER AND GEAR BOX DRIVE
- (C-08) - SHIELDS AND SUPPORTS
- (C-09) - GEAR BOX
- (C-10) - HAMMERMILL SHAFT
- (C-11) - MILL PARTS
- (C-13) - CONCENTRATE HOPPER
- (C-14) - MILL DUST COLLECTOR
- (C-15) - MIXING TANK, AUGER & FENDERS
- (C-17) - MIXING INTAKE AUGER
- (C-18) - BACK UNLOADING AUGER, 6" AUGER & 7" TUBE, 950 S/N 2217 & BELOW, 1150 S/N 6432 & BELOW
- (C-20) - BACK UNLOADING AUGER, 7" AUGER & 8" TUBE, 950 S/N 2218 & ABOVE, 1150 S/N 6433 & ABOVE
- (C-22) - UNLOADING AUGER AND EXTENSIONS, 6 IN. AUGER AND 7 IN. TUBE
- (C-23) - UNLOADING AUGER AND EXTENSIONS, 7 IN. AUGER AND 8 IN. TUBE
- (C-25) - UNIVERSAL JOINTS, STANDARD DUTY ROCKWELL STANDARD
- (C-26) - UNIVERSAL JOINTS, HEAVY DUTY ROCKWELL STANDARD, IDENTIFIED BY RS
- (C-27) - UNIVERSAL JOINTS, HEAVY DUTY REX CHAINBELT, IDENTIFIED BY RS
- (C-28[A]) - LADDER
- (C-28[B]) - MOLASSES ATTACHMENT
- (C-28) - SPRING LOADED TANK LID
- (C-29) - GOVERNOR CONTROL ATTACHMENT, FOR MACHINES W/AUGER DRAG
- (C-30) - VERTICAL 18 IN. EXTENSION AUGER ATTACHMENT, 950 S/N 2217 & BELOW, 1150 S/N 6433 & BELOW
- (C-31) - VERTICAL 18 AND 42 IN. EXTENSION AUGER ATTACHMENT, 950 S/N 2218 & ABOVE, 1150 S/N 6434 & ABOVE
- (C-32) - VERTICAL UNLOADING AUGER & EXTENSIONS W/HYDRAULIC POSITION
- (C-34[A]) - DOUBLE DISCHARGE TUBE SACKER ATTACHMENT
- (C-34) - AUGER LIFT ASSIST ATTACHMENT, FOR MACHINES W/18 IN. AUGER
- (C-35) - SWINGING AUGER DRAG FEEDER ATTACHMENT
- (C-37) - SWINGING AUGER FEED DRIVE, UPPER, MECHANICAL DRIVEN
- (C-38) - SWINGING AUGER FEED DRIVE, LOWER, HYDRAULIC DRIVEN
- (C-39) - SWINGING AUGER FEED DRIVE, HYDRAULIC DRIVEN
- (C-41) - ROLL FEED AND CABLE HOLDUP
- (C-42) - RATION-RITE ELECTRONIC SCALE ATTACHMENT
- (C-43) - CORN SHELLER UNIT ATTACHMENT
- (C-45) - CORN SHELLER DRIVE
- (C-47) - CORN SHELLER DRAG AND HOPPER PARTS
- (C-48[A]) - REMOTE VISUAL AND HORN ALARM ATTACHMENT
- (C-48) - HAMMERMILL BY-PASS ATTACHMENT, UNITS WITH CORN SHELLER
- (C-49) - BATTERY BOX ATTACHMENT, TRACTORS WITH 6 VOLT SYSTEMS, PRODUCT GRAPHICS